T-Slot 12040 End Cap (Triple 4040, Universal Fit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Triple 4040 (120×40) end cap with full 4-slot friction fit and rounded corners. Universal fit design.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
BOM: Printed with ROSA3D High Speed PLA Signal Violet
This is a universal-fit end cap for triple 4040 (120×40 mm) T-slot aluminum profiles, designed to protect and finish profile ends while maintaining a clean, professional look.
It securely engages all 4 outer slots and the central hole with a solid friction-fit connection — no screws or glue required.
The cap’s rounded outer corners match the extrusion’s contour, ensuring a seamless aesthetic finish that also works perfectly as a flat connector for three 4040 profiles arranged side by side.
The model is designed to fit most T-slot systems (Bosch, Item, OpenBuilds, Motedis, etc.), but internal tolerances can vary slightly — you may need to adjust by ±0.1–0.2 mm for a perfect fit.
✅ Features
Compatible with T-slot 12040 (triple 4040) extrusions
Friction-fit mount — no screws required
Rounded corners for OEM-style appearance
Fully engages 4 slots + center hole
Can be used as an end cap or flat connector
Printable flat on bed, no supports needed
Tolerance-friendly design for most systems
🧰 Applications
End protection for 12040 or triple 4040 profiles
Wide-frame assemblies or gantry builds
CNC, laser, and 3D printer frame systems
Clean frame finishing or structural extensions
🛠 Recommended Print Settings
Material: PETG / ABS for strength, PLA for light-duty
Layer Height: 0.2 mm
Infill: 50–100 %
Supports: Not required
Orientation: Flat on bed
📏 Compatibility
Fits most T-slot 4040 / 4080 / 12040 systems
Works as a triple 4040 connector plate
Tolerance adjustment: ±0.1–0.2 mm if needed
Not fully compatible with Misumi extrusions