Core One/+ Cable Cover Magnetic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I thought the cove for the bed cable on the Core One L looked nicer than the grommet on the Core One, so I remixed it.
- Ocena
- 4,545 / 5
- Polubienia
- 73
- Pobrania
- 157
- Wydruki
- 11
- Wyświetlenia
- 759
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I always thought that the cable cover that purse made for the Core One L looked nicer than the grommet on the Core One, so when they made the design files, I knew I needed to remix it to work with the Core One.
The core one has the spot where there is a couple of holes for a zip tie, and I was going to try and use screws but that didn't work. So I decided to use magnets instead.
The model uses four 8x3 mm magnets (You can use to if you don't want to use four). After lots of prints it hasn't moved a millimeter.
Fusion file included so you can change it to use different magnets!!!
Print Settings
Layer Height: | 0.2 | Support: | Optional |
Infill : | 15% | Brim | NO |
Material: | PETG | Filament Designation : | Black/Orange |
More Designs:
 |  |  |