Threaded Faux Barrel Muzzle *** "EX" BCAR Front End - Dart Zone Outlaw (by Mighty Shrub)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Threaded Faux Barrel (ID=17,1mm) Muzzle for the EX BCAR Front End (by Mighty Shrub). --> "Placeholder" for an EX BCAR.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 595
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Threaded Faux Barrel Muzzle (ID=17,1mm)
--> "EX" BCAR Front End (by Mighty Shrub) - Dart Zone Outlaw
I made a printed faux barrel with the thread of the EX BCAR to fit the Outlaw 'EX' BCAR Frontend by Mighty shrub as "placeholder" for an EX BCAR.
If you want to use the frontend without BCAR, you can screw this faux barrel in for the look and as an additional color accent at the front.
--------------------------------------------------------------------------------------------------------------------------
The file is already pre-oriented.
My print settings for PLA:
z-seam position: back --> so the z-seam faces downwards after screwing in the muzzle
0,2mm layer height
4-5 walls
20% gyroid or cubic infill
7 top and bottom shell layers
no supports needed
Thanks to Epicxxxx and Mighty Shrub for the files I could use for this remix.