DeWalt DXAEC2 Battery Tender/Charger/Maintainer Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pivoting Wall Mount and Cord Spool for DeWalt DXAEC2 Battery Charger and Maintainer
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a wall bracket for the DeWalt 2 Amp DXAEC2 Battery Charger and Maintainer that swivels on a hinged mount to facilitate viewing the charge status indicators from across the garage. The vehicle is not a daily driver so checking battery status from the regular pathway helps tremendously. Also included is a wall mounted cable spool that keeps things tidy.
Target Product: https://www.dewalt12volt.com/dxaec2
The hinged plate is magnetically secured when closed by orienting the magnets with opposing polarity to attract paired magnet. There are locating bosses on the mounting plate that mate with the charger to align the unit when mounting.
Charger mounts to plate with (4) #8 x 3/4” UNC screws and #8 hex nuts. Hinge pin is 1/4”-20 UNC x 2-3/4” screw and 1/4-20 UNC nut. Magnet pockets are sized for 8mm DIA x 2mm or 8mm DIA x 3mm.
Parts were printed in PETG with 25% infill.
Added part to park the plug when charger/maintainer is not in use.