58 modeli
I modified the Powder Trickler by Nick van Noordwyk , to add a cap to the bottom. That made it easy to add some weight for stability. Nick graciously provided his Fusion 360 project file, which made it super-easy to make changes to it.…
You'll need supports only for the funnel (both inside and out) so paint them on - Organic supports work best. You'll need to rotate the model on the build plate on a Mk3 for it to fit. For the Halo, Flip the model over first, then use…
This is a simple shelf that covers most of the platten to prevent stray kernels from impacting the measurements. It also allows you to place a small mirror like this from Amazon to make it easier to see the LED indicating over weight…
The Open Trickler is designed to mate with A&D FX-120i/300i precision powder trickling. Real time action: https://www.youtube.com/shorts/f51AgIxleoY Please use github for my most up-to-date changes: Mechanical Design:…
A useful little piece. Place the plate on the scale before fitting the Super Trickler on Top. Catches any powder that falls through preventing it getting under the scale plate and makes clean up easier.
Every session there's always the odd kernels that bounce out of the cup and accumulates in to a mess on your work area. To try to mitigate that annoyance I designed and printed a "splash shield" that slides over the handle and snaps on to…
cap for the supertrickler. helps keep dust and humidity out of the powder hopper. I printed mine in eSun 95A TPU on a Bambu X1C. If your slicer and printer supports STEP files, use that. It will provide much better print quality than STL.
Some of my plants are prone to root rot and require allowing the soil to dry between watering. I have a bunch of these to allow me to fill each up and walk away. The water is introduced slowly enough to wick back into the dry soil without…
dessicant cap for the supertrickler. helps keep dust and humidity out of the powder hopper. Fill the case with dessicant and then put the cap on. I printed the cap in esun 95A TPU and the case in Hatchbox PETG on my Bambu X1C. If your…
Print standing upp with support at the plate 0.4 nozzle I use Bambu PLA-CF
I didn't want to drill a hole in the wall for fume extraction from my printer enclosure so this cowl allows a double glazing trickle vent to be used as the outlet. It doesn't damage the window frame which is useful if you don't happen to…
This is a funnel with stopper (plug) for a SuperTrickler. I didn't like the potential for something to potentially fall into my SuperTrickler when not in use and wanted an easy way to seal it up. Print in the orientations provided, no…
I remodeled this and made a few tweaks to make it more like the original. I have uploaded both a shorter version like Controledburn's version and a standard height version. 11/23/2025 - Added a long version as requested. Print Settings…
Dual purpose! Cap to keep stuff out of the memory card slot on your SuperTrickler. Tool to remove the card from the slot by using either short side to push down on the card to pop it in/out.
Printed with ATOMIC PLA with a Bambu X1C standard PLA settings.
Cap for SuperTrickler bulk tube. Has a plug that extends in to tube, and a knurled section for easy grip.
This is a guide that for me places either the standard AutoTrickler Shot Glass or the AREA419 Powder Cup in the correct location. All that needs to be done to switch is to spin the plate around. Print Settings Printer Brand: Creality…
Cap for SuperTrickler powder dispenser with Aluminum vibration tube. Keeps powder from possibly spilling out when filling or emptying machine.
Added Ctek mount with drain holes. Grabbed a half price Cteck at Black Friday sale. Modern cars with extensive computers have high drawdown if not used for few weeks. In my case this was causing issues with entertainment system due to low…
I designed this base to fit my electronic powder scale that I purchased off Amazon. I remixed the original design to fit my needs and to avoid knocking the trickler over when in use. I will provide a link to the scale that this base fits.…
I created this to help from knocking it over and making a mess… especially after I filled the hallow base of the trickler with some cast bullets. I used m3 bolts to hold the trickler in place along with a tight friction fit. I printed it…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is a simple and lightweight dust cover or lid for the Lyman Brass Smith Powder Trickler, measuring 10mm tall in…
SuperTrickler powder measure stand. This design can be used independently, or it can be attached to the square SuperTrickler powder bowl that people are 3d printing. The ring has a small B on what would be the "Back" of the ring. This…
I keep a cover on my AutoTrickler and every time I take it off, the lid come off because it hangs over the edges of the clear tube. This lid fits inside the clear tube so there's nothing for the cover to grab onto. Print it upside down…
With a nice wide and tall mouth and curved interior, this cup just works. Also, printed in PLA+, it's never had any static issues like glass or aluminum cups. Printed with supports for the handle.
I made this because i have no other alternative of venting fumes/exhausts from my printer since i live in an apartment. It is specificially designed to allow for a high airflow without much restriction. There are some other designs out…
its a very rough draft, might be a bit to small going to do some redesigns within the week
If your tired of your charging cable (Battery Tender and similar devices) dangling from your bike and potentially getting snagged or rubbing your paint? Mount your charging input under your seat so its never in your way again. Requires…
This 3d printed cone replaces the autotrickler straw, which was always a pain for me. I never found a perfectly matching straw (and I tried a lot, big M, s bw y, some from the shop, etc) and there was a lot of powder spillage due to the…
Fits on Küpper/Kuepper Pegboard and holds Hornady Powder Trickler for reloaders.
I've not yet printed this version, but previously tried making this as an assembly, printed in place, the tolerances were too tight, so I've reworked it into this solution. The slider should be placed into the body with the knob through…
Designed as part of my tutorial series. https://youtu.be/Zy_UOalOdp4 Can be printed at 1.5 or 2 layer height
I found that my Hornady vibratory trickler worked a lot better when tilted slightly and needed to be elevated to work with my scale and not get in the way. This stand tilts it 4deg and lifts it approximately 10mm on the left side. I added…
Designed as part of my tutorial series. https://youtu.be/c9DiO21vP-U
Stabilizes and increases the height of your powder trickler. Supports are needed. Scale the Z axis for height adjustment. printed with PETG.
Best to use TPU. But it's kind of tricky to print with. If using any other material, I suggest you clip off the male peg or keep it very short so as not to break it off inside your connector.
What It Is A trickle vent is a small, built-in slot or grille, usually located at the top of a window or door frame, that allows a controlled flow of fresh air into a room even when the window is closed and locked. It typically features a…
By restricting the small tube the auto trickler V4 throws mor consistently but slightly slower. When you have printed the part running a 3mm drill down the hole will clear out any whiskers. Be carful when doing this as if to much torque…
This is a 5mA lead acid battery trickle charger along with its case. It works with any battery up to 35V. You can maintain alarm system, motorcycle, caravan, batteries. The input voltage of the device must be below 40V. The input voltage…
Trickle charging 9V NiMH for longer times is not recommended. In my example, I have an input USB-C → switch → boost module → resistor → led → battery slot. Voltage and resistance is set for optimal (lower) current during charging and very…
cap for the supertrickler to keep dust out of the powder hopper.
When storing my auto trickler between loading sessions i found the hopper can be easily knocked and is very tall, taking the hopper off helped but then the hopper can be knocked over. This is a stand that gives the hopper a stable base.…
The original shop glass does allow the power to bounce out and scatter over the scales platen. this cup is designed to stop powder bouncing out, printed in Pet-G or PC-CF at .20 or .25 layer height. Supports needed for the handle. only.…
Replacement part for certain types of trickle vent with 24mm wide aluminium extrusion. The plastic cylinder for hinge snaps off for easy printing without supports.
It is a wall holder for my tickle charger (brand unknown).
Designed this to keep my workspace more organized. Has a recess so the adjustable base can be screwed all the way up and sit firmly in the mount. Has push fit connectors to use with snaps. I used the moderate weight bearing snaps found…
This is a trickle charge port for an NB Mazda Miata. This replaces the key cylinder just behind the rear bumper. This is mainly for dedicated race cars where you can't open the trunk easily (on pins, or aero blocing it) making it easier…
Works great for catching unused powder and dumping back into bottle
Works great for catching unused powder and dumping back into bottle
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is a simple and lightweight dust cover or lid for the Lyman Brass Smith Powder Trickler, measuring 10mm tall in…
Fits on Küpper/Kuepper Pegboard and holds Hornady Powder Trickler for reloaders.
Finally ready to release my first little collection of 3D printable jewelry after working on and off for the last 3 months It consists of 4 different versions of earrings named Triangle Trickle. I'm really curious how it will be received…
Finally ready to release my first little collection of 3D printable jewelry after working on and off for the last 3 months It consists of 4 different versions of earrings named Triangle Trickle. I'm really curious how it will be received…
Finally ready to release my first little collection of 3D printable jewelry after working on and off for the last 3 months It consists of 4 different versions of earrings named Triangle Trickle. I'm really curious how it will be received…
Finally ready to release my first little collection of 3D printable jewelry after working on and off for the last 3 months It consists of 4 different versions of earrings named Triangle Trickle. I'm really curious how it will be received…
