♻️Upcycled 2 Liter Bottle Dish/holder♻️
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This simple fast print connects a 2 liter bottle into a long tray/holder once the bottle bottom is cut off then halved.
- Ocena
- 4 / 5
- Polubienia
- 11
- Pobrania
- 32
- Wydruki
- 2
- Wyświetlenia
- 532
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This simple quick print connects a two liter bottle into a tray/holder once the bottle bottom is cut off then halved. This connecter also keeps the holders level stopping the bottle from rocking back and forth. I recommend a 0.4mm nozzle with PLA, use a brim to hold down the small edges while also making sure your first layer is perfect in order to avoid clean up afterword's. Must be placed flat side laying down.
Even though its not printed as a bonus the bottom you cut off makes a perfect cup to use for paints. 😊
STEP and STL files attached.
Hope you enjoy!! Happy Printing!!