Prusa Core One L Particle evacuation Ø80/Ø100/Ø125 ducts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact particle evacuation: for Ø80mm, Ø100 and Ø125 ducts.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Prusa Core One L Particle Evacuation System
The horizontal versions are coming soon.
Print Settings: This model is optimized for PETG printing at a 0.2mm layer height.
Supports are required for:
The base
The upper part of the closure valve
The pipe elbow
update :
Base front Ø 80 / Ø 100 / Ø125 "22/01/26"
Base down Ø 80 / Ø 100 / Ø125 "22/01/26"
Optional valve for MVHR :
Closing valve for Ø80 and Ø100
Hardware Requirements:
Base fixation: 4x M3 screws
Closing valve: 3x M3 screws and nuts
Required clearance at the rear of the printer :
|
|---|