1 / 6
Curana Fender Mount for BMC Alpenchallenge AMP — zdjęcie 1
1 / 6

Curana Fender Mount for BMC Alpenchallenge AMP

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fender mounting bracket for BMC Alpenchallenge AMP E-Bike.

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
66
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Summary

A fender mount for a BMC Alpenchallenge AMP E-Bike (model year around 2019), because the fender always hits the tire while riding. The parts are designed to fit on 46 mm wide Curana fenders attaching to the rack. If you just want to secure the fender to the carrier you only need to print the fender hanger. Two M5 nuts and two M5 x 16 mm screws are needed. If you want to reuse the reflector which is glued to the carrier print the reflector mount. You can mount it together with the fender hanger and clip the reflector in.

The fender hanger needs to be post processed with a heatgun. Print with PETG and 100% infill to reduce deformation during bending. Bend the fender hanger with a heat gun 20° and 20 mm away from the fender surface.

Tagi