Blazefury – Legendary Berserker (Print-Ready Single-Colour Statue)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single-colour, A1-friendly berserker statue + support-free wall plaque—prints clean and looks “finished” off the bed.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
This pack includes two display options:
✅ Option 1: Blazefury Statue (A1-friendly)
A bold, clean silhouette with deep shadow lines so the detail reads even in one filament.
Designed to be beginner-friendly and strong on the shelf.
Parts: base + body + axes (keyed for easy alignment)
Recommended scale: 190–220mm tall
✅ Option 2: Blazefury Helm Wall Plaque (Support-Free)
A framed bas-relief with a flat back that prints clean and looks great in matte/stone filaments.
One-piece print • Flat back • No supports needed
Recommended Print Settings (Bambu A1 / PLA)
Statue
Layer height: 0.16–0.20mm (0.16 for sharper detail)
Walls: 3
Infill: 10% Gyroid
Supports: Tree, build plate only (only if needed for the axes)
Brim: 5–8mm (for tall parts)
Wall Plaque
Layer height: 0.20mm
Walls: 3
Infill: 8–12% Gyroid
Supports: No
Brim: optional (only if corners lift)
Best “finished off the bed” filaments
Matte Black (most premium “statue” look)
Matte Dark Grey / Charcoal (best detail visibility)
Stone / Marble PLA (hides layer lines + looks like carved rock)