22 366 modeli
Design for Large eggs (60mm). Choose between 12 or 18 eggs size Fits on PrusaMINI bed After print you could remove the center column. Check some of my paid model at: https://cults3d.com/en/users/Cisco3D/creations Important : IF YOU LIVE…
All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
This mini basket ball can be fully printed in pla and bounce very well from any (reasonable) height. I've found it works perfectly for indoor games such as passage cricket or any other creative indoor games. This ball was inspired by the…
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
I created the stackable version of my Organizer/Basket for Drawer at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High Profile 204.0 124.5 117.5 Standard Profile 60.0 Low Profile…
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Wheel Chock for car. Should work for most car tires, not recommended for truck tyres. No supports required. Recommended to print at 0.35mm, resolution is not really important. Do not use this for safety.
Wide woven basket, diameter 170 mm, height 80 mm. Printed with Prusament PLA without any supports. Sliced in PrusaSlicer 2.7.0. with Input Shaper.
This beauty is a bit tricky to print. I've included a prusa .3mf that should have slicer settings. The multi-color is done with filament changes. PETG and PLA both worked well, just ensure your bed is clean and sticky, and your stringing…
GoPro Mount (Basic Flat) - Print your own GoPro mounts cheaper (10g = $0.50/0.50 EU/ 12 CZK)! - TESTED: very resistant
The magazine base plates will fit original Glock 2-row magazines in “normal size” calibers: 9x19mm, .40 S&W, .357 SIG etc. e.g. for the Glock 17/34/21… I recommend to print them standing upright with a brim and set the slicer to finish…
Darth Vader Bust - on a base with lettering Printer : Flsun V400 layer height : 0,1 line width : surface 0,4 ; inner outer wall and filling 0,6 Scale 100 % no support ; Lightning infill 25% ; print time ~ 14 h JAYO PLA Meta Black…
Attached is 25, 32, 40, 50 and 60 mm blank miniature bases. Also attached is the SCAD file if you want to modify. Want another dimension? Alter the width value of the OpenSCAD file and make your own. Printed at 0.3mm for speed. Round…
This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…
Small woven basket, diameter 80 mm, hight 60 mm. Printed with Prusament PLA without any supports. PrusaSlicer 2.7.0 with Input Shaper.
Welcome to the wonderful game of Finger MiniBasketball! Slice settings: These are the main settings I've used for slicing the parts: Layer height: 0.2mm. There is one part I recommend printing at a smaller layer height, which is the net,…
I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…
Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…
Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.
Fidlock compatible bike base Made for 2 neodym magnets with 10mm diameter and at least 2mm height Fixate the magnets with glue or epoxy. Pay attention to the direction of the magnets when installing! I recommend to print this with 100%…
Easy tool for measuring TCP and Base on robots. Positioning with magnets. Thanks to strong magnets and lightweight plastic, there is no displacement when touched. Each attachment has a screwdriver hole in it, in case the thread in the…
Baseball Cap Holder This support-free wall holder is designed to hold a baseball cap. It was inspired by other similar models but I didn't like that they all seemed to either require supports or weren't designed for command strip…
Assembling: Put the bottom grid into the skimmer basket tube. There are 4 latches at the end of the tube. Material: PETG Nozzle: 0.4 Layers: 0.3 mm Infill: 50 % Skimmer basket tube: Skirt height: 20 layers Loops: 2 Brim: inside and…
Płyta bazowa LEGO w różnych rozmiarach jest gładka od spodu, dzięki czemu można ją przykleić do dowolnej powierzchni. Rozmiary płyty bazowej: 12x8 6x3 6x4 5x4 5x3 Oczywiście na płytce można zbudować dowolna rzecz. Wypusty zostały tak…
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a high-strength design with the series number 300. It is suitable for heavy furniture doors and lids…
Overview These foldable tea bag baskets are perfect for the filament-conscious tea-lover! They print in under two hours, fold really simply, and are designed to be stackable. I made the design in OnShape and there are a few options to…
This Stackable Laundry Basket Storage Box combines practicality with a playful laundry basket design! Key Features: Compact Size: Dimensions of 84x58 mm and 40 mm in height, perfect for small items. Stackable Design: Easily stack multiple…
Track piece to extend this circuit. Short and medium rail have the same length that original parts. Half short is, as it sound, half the size of the short one. It usefull to fill gap in some cases. Print instruction: Supports needed for…
Storage container with swiveling drawers made out of empty Prusament spool. Thanks to @Yell for the Prusament Spool CAD model that helped with the creation of this model. You'll need 2 of each drawer type and 2 pins. You may need to look…
A basic model for quick and repeated printing. Key attribute is the blade which has been blunted so kids can play safely. Printed on a MK3S+ at 0.2mm quality, PLA, no supports, and 15% infill.
This is a simple filament dust collector/cleaner for the Prusa i3 MK Filament Guide ClipOn base. Fits all Prusa i3 MK frames. Uses an ordinary household sponge - cut it to a small cube, as shown on the photos. Easy to replace when needed.…
Simple model of Easter basket. Printed from orange Rosa3d Pet-g. Material: Pet-g recommended ( PLA, ASA, ABS etc.) Layer high: 0,2mm ( 0,3mm possible to print) Support needed
Simple base for the portafilter to have a fixed position for tamping your coffee. It fits specially for the Sage / Breville barista express portafilter with a basket size of 56 mm. The top opening has a size of 61.3 mm.
Box for Dummy 13, which can be used as gift box or box to store Dummy 13 unfolded or assembled. It can be also used as stand base or pedestal for assembled Dummy 13. Box have space for Dummy 13 itself and also for various accessories. To…
Small woven basket, diameter 80 mm, hight 120 mm. Printed with Prusament PLA without any supports. PrusaSlicer 2.7.0 with Input Shaper.
Support only on the top rim, other no needed. Check 3MF file.
At home, we're making our own tablets for toilet cleaning (environmentally friendly and cheaper). So I designed and 3D printed a basket to put it inside the toilet bowl. Design inspired by another model available here →…
I had to print a Stand for my Funko Pop Figure and all that i found did not fit to my expectations. So I designed my own version including a M3x10 Screw. The inspiration for the model came from the linked Model. Thanks for printing!
Golden State Warriors 3D Basketball Logo
Lionel Messi Bas Relief. Testing out Flux + TiledZoeDepth. Flux is nice because there is a lot less need for multiple batches to achieve desired results while using Forge (Stable Diffusion) As long as your description is tight you are…
A couple of mounts for the Arduino Uno or similar models. I got the initial idea from here and designed the stuff in OnShape. You can put the Uno straight on the mount and use it like that, or fasten it onto somewhere with the mount. Also…
Saint Scholastica : Bas-Relief : two versions. The version on the left seems to need some widening while the version on the right could use some tightening up. I was experimenting with some detail manipulation and noticed the distortion…
Saint Sebastian Saint Sebastian was an early Christian martyr who lived in the 3rd century AD. While the exact details of his life are debated, the traditional account holds that he was born in Gaul (modern-day France) and became a…
Car phone holder base for the CD slot for my purchased holder, the base of which does not fit the Skoda Octavia II. It is compatible with iOttie and Swissten holder (sphere diameter 17 mm). Use M3x18 screw and hex nut to connect body and…
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a low-strength design with the series number 150. It is suitable for lightweight doors, chest lids…
30/12/2023 - Added new curved version. 07/06/2025 - Added Stl+Step files for left handed version.
Inspired by Djngnear's tabletop tray, I remixed mikeev's mount for the Sunlu S2 to entirely remove the screw holes (with no internal bits left over) and cut it down to fit on a Prusa Mini/+ bed. I also cut the power cord hole to be open…
Side baskets for IKEA Pax (depth 35 cm)
FilaMan Revamped This is my version of a scale for the FilaMan project. Its an NFC powered automatic scale for Spoolman . I was going for a clean elegant look, hiding as much of the electronics and cables as possible. Please check the…
Gridfinity baseplate to hang to a Kupper (Küpper/Kuepper) pegboard (UE/EU/DE pegboard). Printed in PLA, it needs brim or adhesion disks under the pins (already present in the .3mf file). If you like it or you're having problems with it,…
Sargon II was a prominent king of the Neo-Assyrian Empire who reigned from 722 to 705 BC. He is considered one of Assyria's most successful rulers, known for his military prowess, administrative reforms, and ambitious building projects.…
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a medium-strength design with the series number 200. Two 80mm length hinges of this design will…
This is a storage solution for the Nemesis basegame, the aftermath expannsion and the medic character. Everything fits in the core box premium sleeved with no lid lifting. If the “untold stories” book is included there is a small lid…
Özel bir hat sanatı yazısı ile bismillahirrahmanirrahim (Rahman ve Rahim olan Allah'ın adıyla başlarım) yazısını sizin için stencil haline getirdim. İnşallah işinize yarar. Yorumlarınıza göre geliştirebilirim
BattleTech Hex Base. The standard base matches the dimensions of the Catalyst bases. The pewter mech compatible base includes an oval cutout for the metal base. If you know of any other configurations I should offer, let me know! There…
This is a router base that matches Milwaukee base 2723
Dragon: Perimeter 2 Infill: No Supports: yes wall base: Perimeter 3 Infill: 15%
Fat Bastard from Austin Powers. Act Now. Limited Time Only. Added “Shark With Frik'n Lasers”. (See Additional Picture)
Attached is 25, 32, 40, 50 and 60 mm blank miniature bases with a place for a 5mm x 1mm magnet to be placed. Also attached is the SCAD file if you want to modify for your own magnets. Want another dimension? Alter the width value of the…
Stone base | Brick Pedestal | Miniature stand | Display base | Miniature accessory Customize the dimensions for your miniatures. I look forward to seeing your creative setups and photos featuring this base. Have a happy printing time 💛
A string winder for my basses/guitars, 100% fill, printed with PETG and Prusa slicer. It can also be used with an electric screwdriver.
This is remix of Logitech C270 tripod for 30x30 extruded aluminum profile. Print instructions Rafts: No Supports: No Resolution: 0.2mm Infill: 40%
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Add a some small Cylinders as Negative Volume for draining Print upside down Scale it as you like :)
Small lampshade for E14 lamp thread. Please only use with LED light.
Salacious B. Crumb R.I.P. Mark Dodson, voice of Star Wars: Return Of The Jedi ’s Salacious B. Crumb
The ferrite core hangs around a bit, because the cable to the basic board is just too short to accommodate the core in the enclosure. Maybe the cables for the basic board differ, mine is a bit too short at this point. With the model you…
This is a storage solution for the classic wargame Command and Colors Napoleonics from GMT games . As the game has three different piece sizes, I have divided them in three trays: Infantry : 180 pieces Cavalry : 77 pieces Artillery and…
A toilet plunger holder!! The g-code for the plunger holder base and lid both have Octogram Spiral selected for top and bottom layers which leaves a nice little design on those layers as an option to just smooth. Also, the base holder has…
Printed with Support for the tip, which is put into the Iron Man. Put some tape around the tip for a tighter fit.
For the times you did your best in basketball. The toleances on the legs slotting into the base are tight and the model may need to be printed with high infil in thin areas such as the arms and legs. download if you want and please share…
Designed for 0.40mm nozzle, 0.15m layer height, 100% infill, and 6 perimeters or higher. I print my first layer at 205c and other layers at 200c as general rule with PLA but higher temperatures should be OK.
Shopping Basket with Screw Assembly – Practical, Sturdy, and Stackable This 3D-printable shopping basket is designed for everyday use and easy assembly. The construction is solid and functional – ideal for home, workshop, or office. 🔩…
When in doubt, eat bread. I designed this jewelry set as a surprise for Twirlygrl. (Shhhhhhhhh!) Size up or down but watch the size of the post hole. You can also make a necklace or pendant for other forms of jewelry. For the findings to…
Description Ever wanted to know what your pet wants to tell you? This won't solve it! But still can spark some joy and fun! An Arduino-based DIY version of Talking Pet buttons! It's easy to build and add customized sound samples to use…
Reduce some stress in your Mini-Z driving experience with this practice body inspired by the iconic Lamborghini Countach. It's designed to withstand occasional crashes and smoothly transition across different terrains, including hardwood…
36 holes, two or three colours
Greek Oil Alabaster Jar. Often used to hold perfumed oils that were used after bathing. Motif shows Egyptian stylizations.
Compact Hub to hold up to 8 Lego Spike Prime or Essential batteries. This was specifically designed for local school and the 8-port usb power strips they had. I have found an equivalent power strip at: https://a.co/d/2DvmCf6 Recommend…
This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.
TheTickz made an amazing carabiner clip and i found it while searching out attachments for SWMBO(She who must be obeyed)'s upcoming vacation. However, I wanted to make it be able to be screwed in with a wider flange base as she will be…
This model of a vase is inspired by the stunning basalt columns at the Giant's Causeway in Northern Ireland. The model can be combined with a glass insert to make it waterproof. The glass insert can be easily removed for easy cleaning.…
Included are STEP file for your CAD tool, or directly the Fusion files. If you like the model as it is, the STL model files and the Slicer files. As a hint i uploaded also the print code made for a MK4. The board frame is hold by magnets…
These Display bases were designed by me but were created based on MroznyHipis ( @stawiamklocki.pl ) display stands. Base size: 75322 AT-ST Hoth Base - 165x165x6mm 75153 AT-ST Walker Base - 165x165x6mm 75254 AT-ST Raider Base - 165x165x6mm…
for English see below Bisher habe ich Lautsprecherkabel und Netzwerkkabel aus dem Bühnenbau auf Kartonagen gewickelt. Jeder kennt wahrscheinlich das resultierende Problem: es entstehen Kabelschlingen, je länger das Kabel umso schlimmer.…
two colours, 20 cm
This is an option to store the Catan main game and the “Cities and Knights” and “Seafarers” expansions in a single box. The models have been slightly changed from the original, so the “5 - 6 player” function is lost, as space was needed…
Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .
Dient als Abdeckung in der Nacht, wenn das grüne Licht der Multicontrol zu sehr blendet.
Woven Basket – Versatile Decoration Explore our beautifully designed woven basket, the perfect decorative accessory for your home. Whether you use it as an elegant bowl for keys, jewelry, or other small essentials, this basket combines…
It's a replacement part for the original wall mounting plate of IKEA Bästis / Bastis. The only difference is that I made the base of the pegs on top of the plate touch more area of the plate for better layer adhesion. Please post a Make…
Art Nouveau Bas Relief : 1913
crochet basket bottom, clock faces (dials), coaster, wall art, pendant (one colour, two colours, three colours)
30% infill, no raft needed, print upside down.
This is a mounting cover/frame for a Rosahl M-1J1R electric dehumidifer membrane which can be used for a filament drybox of around 20-30l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…
Compatible with this Govee thermometer or any other device that fits in the basket hole:66x21.5mm
I've always wanted base bigger base plates for my RIA 51679, but certain companies that provide them are wishy washy on if they will fit this particular magwell. Plus they are expensive. This one fits the magwell and adds no additional…
I created this collapsible Base so that i can first get out of my simrig and second that the Virpil Sticks are not in my eyesight when i play racing games. Apart from the print you will need 4x M6x20mm Screws 4x M6 Brass Inserts 4x…
