22,366 models
Design for Large eggs (60mm). Choose between 12 or 18 eggs size Fits on PrusaMINI bed After print you could remove the center column. Check some of my paid model at: https://cults3d.com/en/users/Cisco3D/creations Important : IF YOU LIVE…
Print approx. €10.21–€12.48 excl. taxPreliminary estimate for one variant
Importatnt note: Model will only fit with the Prusa MINI version that has the old Z-bottom plastic part version. Even though the Original Prusa MINI+ is a compact printer, sometimes you might feel it takes up a little more space than is…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Print approx. €7.23–€8.83 excl. taxPreliminary estimate for one variant
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
Print approx. €11.13–€13.60 excl. taxPreliminary estimate for one variant
This is a little stackable Storage Box. You can print it with the draft setting and it works just fine. There are two types, one stackable, one non stackable. They are nearly identical. Hope you have fun printing and can use it!
Print approx. €11.25–€13.75 excl. taxPreliminary estimate for one variant
Found with a heavy plate that I wanted to display that the original felt like the balance was off and could easily fall over when bumped. I have copied the summary from DanRom624 (original from Thingiverse:…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET
This mini basket ball can be fully printed in pla and bounce very well from any (reasonable) height. I've found it works perfectly for indoor games such as passage cricket or any other creative indoor games. This ball was inspired by the…
Print approx. €3.40–€4.15 excl. taxPreliminary estimate for one variant
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant
This is venom skull on symbiont base with tongue . Base and tongue is designet for faster print without support . Hole in base for tongue is biger .If you want , try scale him up a little . Happy printing.. Print instructions Category:…
Print approx. €5.73–€7.01 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
Print approx. €3.36–€4.10 excl. taxPreliminary estimate for one variant
***CHECK UPDATES BELOW*** Summary My print: https://youtube.com/shorts/qCkzSldsGnc?feature=share I wanted to challenge myself to design a March Madness trophy, so here's what I came up with. I designed it at 207mm height, and because of…
Print approx. €14.38–€17.58 excl. taxPreliminary estimate for one variant
A very simple "vase mode" basket print. I wanted a quick waste bin for my print scraps (and fails). Fusion 360: - Polygon - Sweep, taper, and twist 3D Builder: - Simplify (for low poly look)
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
I created the stackable version of my Organizer/Basket for Drawer at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High Profile 204.0 124.5 117.5 Standard Profile 60.0 Low Profile…
Print approx. €3.93–€4.81 excl. taxPreliminary estimate for one variant
Edit: I also tried a different approach here: Let's build...Drybox v2! by Ren | Download free STL model | Printables.com You can find many single parts, videos or blog posts regarding dryboxes. When I realized I have stringing problems…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Recommend printing in PETG Personally I printed it Gyriod with 20% infill and 5 layered walls for extra resistance. FOLLOW Radical Maker’s instructions for more details. ***DO NOT put full strength into the clamp it will possible snap…
Print approx. €0.45–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
The motivation for designing yet another Gridfinity base grid was the hour of print-time and the sub-par angles on the original design. I figured that it's not necessary to extend to grid completely to the top of the 45° angle. Once…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Printable accessory developed specifically to enable you insert more spools into your Original Prusa Enclosure. Note that you need the injection moulded part delivered with your Original Prusa MK3S+ printer (see the pictures). In case you…
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
Wheel Chock for car. Should work for most car tires, not recommended for truck tyres. No supports required. Recommended to print at 0.35mm, resolution is not really important. Do not use this for safety.
Print approx. €22.67–€27.71 excl. taxPreliminary estimate for one variant
A nice simple test for the MMU2 (or MMU2s) which uses all five filaments. Gcode included for MMU2s and MK3s Print instructions I printed these at 0.2. Gcode included.
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
Wide woven basket, diameter 170 mm, height 80 mm. Printed with Prusament PLA without any supports. Sliced in PrusaSlicer 2.7.0. with Input Shaper.
Print approx. €10.92–€13.35 excl. taxPreliminary estimate for one variant
This beauty is a bit tricky to print. I've included a prusa .3mf that should have slicer settings. The multi-color is done with filament changes. PETG and PLA both worked well, just ensure your bed is clean and sticky, and your stringing…
Print approx. €2.23–€2.73 excl. taxPreliminary estimate for PETGSource material: PET
🇷🇺 Добро пожаловать в Россию Welcome to Russia Important Note: Artemio García started creating this model for MiniWorld3D several years ago. When he finally finished it, the war between Russia and Ukraine had just started. We decided to…
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
Inter Miami Messi Full with Logo Base. Solid one piece version of : https://www.printables.com/model/502110-inter-miami-messi
Print approx. €9.68–€11.84 excl. taxPreliminary estimate for one variant
My father needed drawer baskets for his good old kitchen from the 70s. He tried to find drawer baskets suitable for these weird dimensions today, but he searched in vain. So what do I have a 3D printer for? 😊, so I designed some. You can…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
The clip is being used to mount an IKEA TROFAST (42x30x10cm) metal basket to a Tripp Trapp. The clip will not work with the TROFAST plastic bins. I have the 4th Generation Tripp trapp at home. I think it should also fit on the 3rd…
Print approx. €3.32–€4.06 excl. taxPreliminary estimate for one variant
Minor remix to clean up some artifacts and details from when @henry remixed an older design previously. Super useful little bins. Prints nicely for me in PLA at 0.3mm, 20-100% infill.
Print approx. €5.80–€7.09 excl. taxPreliminary estimate for one variant
Since a lot of people liked the incremental rotatable version, I made a basic version that rotates the full 360 °
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
GoPro Mount (Basic Flat) - Print your own GoPro mounts cheaper (10g = $0.50/0.50 EU/ 12 CZK)! - TESTED: very resistant
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
The magazine base plates will fit original Glock 2-row magazines in “normal size” calibers: 9x19mm, .40 S&W, .357 SIG etc. e.g. for the Glock 17/34/21… I recommend to print them standing upright with a brim and set the slicer to finish…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple display stand for a baseball. Baseballs can vary in size slightly, but not by much, so they should all fit. Show off that great "No Hitter" ball you earned or a great autograph you acquired. Posting photos of your printed…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
About the Smart Storage basket: The Smart Storage slide-out hanging basket is used for storage of various items. It can be used to storage food in the refrigerator, in the office for storage of office supplies or in the garage for storing…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
Based on the linked original models. GCode includes Organic Support. 3mf file, as well i suggest to print it with painted on support.
Print approx. €5.60–€6.84 excl. taxPreliminary estimate for one variant
1/100 Scale MG Gunpla Model Base. No Assembly Needed.
Print approx. €4.75–€5.81 excl. taxPreliminary estimate for one variant
Darth Vader Bust - on a base with lettering Printer : Flsun V400 layer height : 0,1 line width : surface 0,4 ; inner outer wall and filling 0,6 Scale 100 % no support ; Lightning infill 25% ; print time ~ 14 h JAYO PLA Meta Black…
Print approx. €9.67–€11.82 excl. taxPreliminary estimate for one variant
This is a remix. I didn't design this nice model, I've only converted it in STL and added a base. The original model and author here https://sketchfab.com/3d-models/spiral-a4e84079db884dddbc2e980b44ce8cfd kylie Printed @0.15mm with PLA:…
Print approx. €8.48–€10.36 excl. taxPreliminary estimate for one variant
🇻🇦 ¡Benvenuti in Vaticano! Welcome to the Vatican! The world has a new Pope, Leo XIV, and on this occasion, MiniWorld3D is bringing a major landmark of Rome and the world to our library. This entry is a highly-detailed model of St Peter's…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
When I design the Ultimate router jig, ( https://www.printables.com/model/847294-ultimate-router-jig) , I was not able to find a trim router base wich can be easiliy printable without support. For this reason I decided to design my own…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
A simple base plate for all Prusa MK3 models. New: I added a version which has holes to fix it with four screws ( M3x10 ) and T-nuts . This is more stable than the first version. I recommend to stick some foam rubber or similar as shown…
Print approx. €5.74–€7.01 excl. taxPreliminary estimate for one variant
My first mashup :) There are 2 versions. Table and hanger. For hanger it takes 5x5x5mm hock. stl-s have an error as the bottom is not flat. On my PC it took me 1.5 hours to make hanger variant, so I decided to cut it in slicer. 3mf files…
Print approx. €5.99–€7.32 excl. taxPreliminary estimate for one variant
Attached is 25, 32, 40, 50 and 60 mm blank miniature bases. Also attached is the SCAD file if you want to modify. Want another dimension? Alter the width value of the OpenSCAD file and make your own. Printed at 0.3mm for speed. Round…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
A complete Easter decoration set — knitted-texture eggs paired with a matching woven basket, both designed from scratch in Blender. The eggs feature a realistic crochet-style knit pattern across the entire surface. The basket uses a…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Basketball ball suitable as decoration. There is still a pedestal planned, during this week I will add a version with a pedestal. Print instructions printer Prusa MK3 0,2 quality infil 15% filament PETG
Print approx. €12.57–€15.36 excl. taxPreliminary estimate for PETGSource material: PET
There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…
Print approx. €2.25–€2.76 excl. taxPreliminary estimate for PETGSource material: PET
Replica of the genuine Fidlock magnetic base. Works just as well as the original. -Model has two internal cavities to drop in magnets during print then print over the top. Magnet size is 12x3mm. Careful when dropping in the magnets as the…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
Small woven basket, diameter 80 mm, hight 60 mm. Printed with Prusament PLA without any supports. PrusaSlicer 2.7.0 with Input Shaper.
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
Holder for baseball cap.
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
This is just test Gcode, for more info (userguide) please look at: https://3dlabprint.com/shop/cessna-152-based-trainersport-plane/
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant
Welcome to the wonderful game of Finger MiniBasketball! Slice settings: These are the main settings I've used for slicing the parts: Layer height: 0.2mm. There is one part I recommend printing at a smaller layer height, which is the net,…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Here is my design of a tiny basketball basket - your tiny playground in your office! I've provided a bin mount and a table stand for it. All the color changes are layer based so you won't need a MMU for it, there are also no supports…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
General purpose model stand. Can be scaled easily. Typically I sand and paint the stands before gluing models down. Then applying the final paint once the model is adhered.
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
Easy to print lightweight drip tray for the Pokémon Bulbasaur Planter. Catches the excess moisture and allows it to evaporate. Can easily be scaled up or down on the X and Y axis. Printable with all common nozzle sizes: .25 .4 .6 and .8…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
2-piece basketball, just join the same pieces together :)
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
A simple basket style lamp shade for B22 socket. Print instructions Should not need supports. Use heat resistant filament if you use hot lamps, LED should be fine with PLA.
Print approx. €12.09–€14.77 excl. taxPreliminary estimate for PETGSource material: PET
Tento 3D model představuje skládací košík, který může sloužit jako dekorace nebo hračka. Košík je navržen tak, aby byl snadno sestavitelný a rozkládatelný. Jeho teleskopický princip umožňuje, aby se složil do malého tvaru a následně se…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Basket 130 x 98 x 60 (in 120 x 88 x 58) [mm]
Print approx. €10.50–€12.84 excl. taxPreliminary estimate for one variant
Captain Jack Sparrow from Pirates of the Caribbean with base.
Print approx. €9.95–€12.16 excl. taxPreliminary estimate for one variant
Manu Militari (witch translate to “With a military hand” in Latin, meaning using military force or force of arms) is an hex-based terrain tiles system that can be used for wargames, strategy games, RPGs and so on… The tile system At its…
Print approx. €4.44–€5.43 excl. taxPreliminary estimate for one variant
Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…
Print approx. €6.12–€7.48 excl. taxPreliminary estimate for one variant
This is a Cryptex similar to the one shown in De Vinci Code by Dan Brown. The Main shaft holds all the letters gears in place. The letter gears can be changed around to produce a different combination. There are almost 12 million…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Printing instructions: Add some extra veritcal shells to increase durabilitie of the wings Remove “Elephant foot compensation” to make the connection link at the tail wing work. Let the model cool down after printing. Removing it while it…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Mini Figure Base/Stand, 25mm print it flat side down for best results
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant
Fidlock compatible bike base Made for 2 neodym magnets with 10mm diameter and at least 2mm height Fixate the magnets with glue or epoxy. Pay attention to the direction of the magnets when installing! I recommend to print this with 100%…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
A variation of my Galaxy Watch 4 / Cell phone charging station. The base model is the same but the watch charging spot has been modified to hold a Apple Watch contactless charger. The model will fit any charger that's 27.6 mm wide by 6,…
Print approx. €5.98–€7.30 excl. taxPreliminary estimate for one variant
This is what I call a Storing Maching, it's a robotic spool tower, which has a mecanism in it that open and closes the drawers via the rotation of a nema 17 Explanation Video : Download Files: Assembly Guide PDF…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
According to the manual, kids will model simple mooring cleat, which will help them to learn how to tie cleat hitch. After printing, mooring cleat can be screwed to the wooden base with two screews.
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Goal of the design: I got tired that my Arduino prototypes were so difficult to move, and that the jumpers were always being ripped out due to the board being separate from the breadboard. The goals for this design were; Easy attachment…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Hit a home run! At home and in your hands. With the first ever 3d printable baseball pinball here in Prusaprinters. Do you miss playing outside? This completely functional baseball-pinball can make you miss it a little less, have fun in…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
A simple base for who like me didn't know where to put an entire sword but still wanted to print this beautiful model. The fit of the parts should be as tight as the other sword pieces since I directly used the next sword segment to get…
Print approx. €9.46–€11.56 excl. taxPreliminary estimate for one variant
Easy tool for measuring TCP and Base on robots. Positioning with magnets. Thanks to strong magnets and lightweight plastic, there is no displacement when touched. Each attachment has a screwdriver hole in it, in case the thread in the…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
This is my design of a woven basket. It requires no supports for printing. Video How to Print the Basket A Prusa Slicer example project, LR2316-… Print.3mf , is available with all recommended settings. Feel free to use this, or refer to…
Print approx. €9.96–€12.17 excl. taxPreliminary estimate for one variant
Baseball Cap Holder This support-free wall holder is designed to hold a baseball cap. It was inspired by other similar models but I didn't like that they all seemed to either require supports or weren't designed for command strip…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Snap-lock pin for the screw together gridfinity baseplate by Kyle Warren. Itself Based on ZackFreedman design . Kyle himself describes his baseplate as “overkill”, and while I love the model, I don't quite need the rigidity of screws; I…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
If you want a completely SILENT printer, print this and see bellow for TPU LCD panel support. Vibration dampers. Reduce noise and vibrations. This is the most functional design I could find or imagine based on existing models I could…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Assembling: Put the bottom grid into the skimmer basket tube. There are 4 latches at the end of the tube. Material: PETG Nozzle: 0.4 Layers: 0.3 mm Infill: 50 % Skimmer basket tube: Skirt height: 20 layers Loops: 2 Brim: inside and…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
Use brim for launcher + tree supports for balls. A compact tabletop basketball game based on flick mechanics and precision. Place the ball on the launcher, press down, and release to shoot towards the hoop. The force of the press controls…
Print approx. €7.50–€9.17 excl. taxPreliminary estimate for one variant
This is a basket for the Nespresso pods. currently not printed the model but should be able to fit a good amount into it and you can scale down or up depending on your printer size. Size: 222x222x150
Print approx. €21.17–€25.87 excl. taxPreliminary estimate for one variant
I made this small holder to place the coffee basket of my moka pot for filling and preparing the pot. Previously I tried to balance the basket on the tube, but then I remembered, I have a Moka Pot Basket Holder Maker aka 3D-Printer :)…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
Extended baseplate for Makita Router, it give you more stability. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25% Look…
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant
A great-looking statuette of a panther. Like this, the model looks finished and it's finally stable. You can print it quite big. (110mm). You can use organic supports. I recommend using a brim wide enough to catch the organic supports as…
Print approx. €9.16–€11.20 excl. taxPreliminary estimate for one variant
New box for holding magnets. - 2x washer up to 24mm diameter, inner diameter over 8mm, 2mm height - Insert into box during printing https://www.printables.com/model/1469521-roboter-tool-measuring-tcpbase
Print approx. €5.18–€6.33 excl. taxPreliminary estimate for PETGSource material: PET
To replace the stock Prusa base - allows reuse of the parts already printed for the https://www.prusaprinters.org/prints/10370-gravity-spoolholder-for-mmu2s Also included is an MMU2 version, HEX bottom (Same HEX pattern as sides) added…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for one variant
This cleat fits perfectly in the wide opening of the lid. You can use it to attach things to the lid of your packout cases. Print with no suppports
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Fix all the part like the plan in PDF with M4 x 25mm wood screws, I put mine on 388mm x 290mm x 20mm wood bord.
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Minnesota Timberwolves NBA Basketball Team Logo
Print approx. €16.89–€20.65 excl. taxPreliminary estimate for one variant
Płyta bazowa LEGO w różnych rozmiarach jest gładka od spodu, dzięki czemu można ją przykleić do dowolnej powierzchni. Rozmiary płyty bazowej: 12x8 6x3 6x4 5x4 5x3 Oczywiście na płytce można zbudować dowolna rzecz. Wypusty zostały tak…
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a high-strength design with the series number 300. It is suitable for heavy furniture doors and lids…
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
Small base for cheap Velcro straps that can be hotglued under the desk for neater cable management.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Cardbox with dividers. no supports needed.
Print approx. €10.86–€13.27 excl. taxPreliminary estimate for one variant
Overview These foldable tea bag baskets are perfect for the filament-conscious tea-lover! They print in under two hours, fold really simply, and are designed to be stackable. I made the design in OnShape and there are a few options to…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
This is a decorative basketball. Print the two halves, insert pegs into the alignment holes, and glue together. The grooves are designed to fit a 1.75mm filament. You can glue filament in place to emphasize the lines. You could also try…
Print approx. €4.53–€5.54 excl. taxPreliminary estimate for one variant
This is my first try at creating a mold for a concrete pot. It is almost the largest mold you can make with the Prusa I3. You need to use a mold release. You can get special concrete mold release, or you can use most of a can of non-stick…
Print approx. €26.82–€32.79 excl. taxPreliminary estimate for PETGSource material: PET
