soap dispenser/pump & sponge dripping rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just a lil soap dispenser / sponge dripping rack i drew up.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
works with soap dispensers of up to 75 mm diameter and sponges with roughly 70 x 45 mm.
i would suggest to manually place 2 support enforcers in the square corners where the extruded overhangs aren't going in a straight line but around the corner (see last image).
also needed to print about 4x of the feet i uploaded. maybe 3 would work, but rather use 4 as it's more stable.
just glue them somewhere in to the slots with some superglue.
it's not parametric or clean or anything but i threw in the step file so maybe you can adjust some measurements without messing the model up too much lol