Ajax GlassProtect Jeweller 45° Angle Mount / Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim 45 degree angled wall mount for Ajax GlassProtect Jeweller sensor. Ideal for corners and angled surfaces.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple and slim 45-degree angled mounting bracket designed for the Ajax GlassProtect Jeweller glass break sensor.
This mount is useful when you need to install the sensor at an angle.
Hardware required:
2× M3×8mm screws (to attach the sensor to the bracket)
Original Ajax wall screws (to mount the bracket to the wall)
Installation:
Mount the bracket to the wall using the original Ajax screws through the provided holes
Attach the GlassProtect sensor to the bracket using M3×8mm screws
Print settings:
No supports needed
3 perimeters recommended for strength
>30% infill (tested it with 30% and it is strong and not flimsy at all.)
Tested and working with the Ajax GlassProtect Jeweller. The sensor clicks securely into place.