Liczymy pasujące modele…
I am going away for the next couple of years, so I wasn't able to make an assembly guide and a gameplay video like I normally do. In addition to the 3D printed parts, you'll need to buy the following: 1 - Some of this pipe to make the…
Ajax does not sell spare parts directly to consumers, so this is useful if yours broke and your installer doesn't return your calls :( This is for motion sensors 9638 & 9637 only. I modelled this part after the original (part number…
One colorchanges every 1mm (two changes in total). When printing the upside-down version: start with white, change to red and finish with black. You can print the model upside down to give the top surface a nice finish or you could try to…
Just snap the lid onto the top of the container. Use TPU filament to print. It helps keeps the powder dry and in the can, not trapped between the top of the can and the lid.
EDIT 7/19/2024: Some have commented about the difficulty disassembling the top from the bottom. A User suggested simply CUTTING OFF the nubs, which also seems to work well. This works really well! EDIT 7/17/2024: From AJAX: Made the…
Made in Tinkercad. with a view to use it as an amusement ride in my N gauge model railway running on Z gauge track. Modelled from a photo of the "Ajax" Saddle Tank steam locomotive, working at Chatham Historic Dockyard. An open topped…
Ajax-War Rocket from Flash Gordon
This is my version of the War Rocket Ajax from the 80's classic Flash Gordon movie! She's about 500mm long built, is mostly hollow and can be lit. There are a number of construction options depending on the size of your printer, a 200mm…
Hood for MotionProtect Outdoor protects sensors of the anti-masking system from rain and snow https://ajax.systems/products/mpo-hood/ Козырек для датчика движения MotionProtect Outdoor, защищающий сенсоры маскирования от дождя и снега…
🐶 Valentine Puppy – AJAX (cartoon style, noAMS) Love is in the paws! Meet Ajax – an irresistible puppy designed in a cute cartoon style, ready to deliver your message of love. With his big, soulful eyes and floppy ears, Ajax holds a large…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I've added photos as I used the jig. Just about every step is facilitated using it. The fun will be in figuring out which portion to use!
Made a coaster holder for the Ajax coaster by wootje13 (scaled to 100mm in x and y) https://www.printables.com/model/106629-afc-ajax-coaster Can hold 6 coasters.
AJAX System WallSwitch or Relay Case Update 01/02/2025 added 2 cuttable holes for passing cables
You can scale the model, but do not scale Z! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Black Transmission Distance: 0.3 RED Transmission Distance: 3.5 WHITE Transmission Distance: 4…
*** You are doing me a big favor by clicking the Like button :-) *** 45 degrees holder for Ajax GlassProtect
◾ Size: 20cm / 7.9 inches in width, 20cm / 7.9 inches in height, and 0.3cm / 0.1inch in thickness. If you want to increase the size of the model, you can take it apart and print it separately. ◾ If you want to paint your model with a…
Remixed ErdeSchnauz's Parametric Box (which itself was a remix of another which is now broken when modifying in Fusion) to make a case for my TD1s as the cardboard box it came with wasn't going to last long! Case has space for the TD1s…
Capot contact Ajax DoorProtect extérieur PETG
A replacement support for the AJAX System indoor siren
white until 6.2mm red until 6.8mm finish with black
Needed a waterproof housing for the Ajax door protect. Two different base plugs - one has a hole right through so not waterproof. Other one the threads only go halfway. Use M6 x1.0mm bolt to remove plug to change batteries.
📦 Ajax Systems Wall Mount Adapters MotionDetect Corner Adapter + MotionCam Outdoor 45° Wall Mount 🧩 Overview This upload contains three custom mount adapters designed for Ajax Systems detectors: 1 MotionDetect Corner Adapter Angled corner…
Designed to go with Ajax locomotive previously posted here. I made this carriage to fit the Z gauge wheels made by Rokuhan. (I have since tried to fit some wheels to this carraige and find that due to shrinkage, or different manufacturing…
I wanted a case to put my TD-1 from AJAX, USB-C cable, and the cut and glue helper from togeis to keep them together and protected. In addition to the two printed parts, you'll need: 2 M3 X14mm screws and nuts. I used nylon inserted…
I've included a sleeve I made to fit over the chamber part so it would fit inside a piece of 80mm PVC because I couldn't find 3" OP listed locally, it's a tight fit on both sides but holds it in with no need for glue thought would still…
Absolutely not an Achilles Ridgerunner standin
Ajax MotionProtect Plus Jeweller. Justerbart væg- og hjørne montering beslag Designet til Ajax MotionProtect Plus Jeweller med fokus på fleksibel opsætning, nem 3D-print og enkel montering på både væg- og hjørnemontering. Funktioner…
Ajax Bust is a detailed 3D printable statue inspired by Ajax , one of the greatest heroes of Greek mythology and a legendary warrior of the Trojan War . The model presents Ajax in a crested helmet, holding a spear across his shoulders and…
The modified rear cap and the original chamber do need to be printed with a higher in-fill and walls because of the high pressure from c02. These stls use the same parts as the original. The only thing changed is the hole placement for…
This is a self designed case by carefully measuring Ajax uartBridge with calipers. There is no affiliation or endorsement in any way from Ajax. The case is pretty tight, and requires pretty precise tolerances both for fitting PCB and for…
I combined this Ajax lamp: https://www.printables.com/model/415444-ajax-lamp with this Darth Vader wall decoration: https://www.printables.com/model/322394-darth-vader to make a fun secret santa present. Stand is made out of wood and…
A simple and slim 45-degree angled mounting bracket designed for the Ajax GlassProtect Jeweller glass break sensor. This mount is useful when you need to install the sensor at an angle. Hardware required: 2× M3×8mm screws (to attach the…
A housing for a flasher using an Ajax alarm system relay. The specific set used is the following: https://www.alarmsysteemexpert.nl/products/ajax-flitser-set-oranje This set consists of following components: - Jablotron DE06-12 - Solex 10…
Description: A ceiling mount bracket designed for the Ajax Curtain Outdoor Jeweller motion sensor. Features: Securely holds the sensor in place Three mounting holes for ceiling installation Clean, low-profile design Print Settings (adjust…
The TD1s is a brilliant gadget developed by Ajax -3d and is indispensable for determining the transmission distance and colour of prints when creating the likes of HueForge documents. For more information, check out the WEBSITE. This box…
A simple roof mountable bracket to mount 2x glassprotect sensor. The faces are 15 degrees apart in order to also be able to pick up a window towards the front of the mount, while the backside was mounted facing an interior wall. F3D and…
C’est ma première création. J’ai détouré ce personnage de BD pour en faire un magnet. Comme je n’ai pas d’imprimante multi-couleur j’ai fait dans le gcode des pauses pour changer de couleur et pour insérer le petit aimant. Je pense que ça…
Just snap the lid onto the top of the container. Use TPU filament to print. It helps keeps the powder dry and in the can, not trapped between the top of the can and the lid.
📦 Ajax Systems Wall Mount Adapters MotionDetect Corner Adapter + MotionCam Outdoor 45° Wall Mount 🧩 Overview This upload contains three custom mount adapters designed for Ajax Systems detectors: 1 MotionDetect Corner Adapter Angled corner…
EDIT 7/19/2024: Some have commented about the difficulty disassembling the top from the bottom. A User suggested simply CUTTING OFF the nubs, which also seems to work well. This works really well! EDIT 7/17/2024: From AJAX: Made the…
I combined this Ajax lamp: https://www.printables.com/model/415444-ajax-lamp with this Darth Vader wall decoration: https://www.printables.com/model/322394-darth-vader to make a fun secret santa present. Stand is made out of wood and…
This allowed the contractton to be placed in a solid way. I have got Ajax System, I had no way to mount it. so with help I created a simple practical ideahttps://ajax.systems/products/doorprotect/
