FLSUN V400 Extrusion End Caps for Enclosure Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement extrusion end caps for the FLSUN V400 designed to support enclosure panel mounting
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
These are replacement extrusion end caps for the FLSUN V400, designed to support enclosure panel mounting while maintaining a clean, factory-style look.
The caps replace the stock extrusion ends and provide flat mounting surfaces with screw holes suitable for attaching enclosure panels such as acrylic, polycarbonate, or similar materials.
What’s included:
- Extrusion end cap variants sized for the V400 frame
- Mounting holes aligned for enclosure panel attachment
- Designed as direct replacements for the original caps
Use cases:
- Full or partial enclosures
- Custom side panels
- Clean enclosure builds without drilling the frame
Print notes:
- No supports require
- Print flat on the bed
- PETG or ABS recommended for enclosure environments, PLA is fine for open printers
Layer height: 0.2mm
Infill: 20–30%
Walls: 3+
Supports: None
Orientation: Flat on bed
These parts are purely mechanical and do not alter the printer frame or motion system.