Heavy Duty Adjustable Mirror Mount - Wall Hanging Bracket System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two-part mounting system designed for hanging bathroom mirrors.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
This is a robust hanging mechanism designed to replace or upgrade standard mirror clips. It was designed specifically for a bathroom mirror but can be used for other heavy wall-mounting applications (frames, panels, organization boards).
The Hook (Red in photos): Attaches to the Wall It features an elongated countersunk screw slot, allowing you to slide the hook up or down slightly to get the mirror perfectly level before tightening.
The Receiver (Yellow): The wall-mounted socket that catches the hook.
Infill: 40% or higher (Grid or Gyroid) for heavier frames
Supports: [Yes/No - The red part looks like it prints on its side without supports, but the yellow part might need them depending on orientation].
Orientation: Print the Red Hook on its side for maximum layer adhesion strength.
*find a good adhesive double sided tape or glue to attach the receiver to the back of the Mirror (yellow)