1 / 5
Cable Holder for Panasonic Monitor — zdjęcie 1
1 / 5

Cable Holder for Panasonic Monitor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cable holder originally designed for Panasonic 1760 production monitor

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

Cable holder originally designed for Panasonic 1760 production monitor - it's designed for BNC cables but will work with others as you can see. I've uploaded a left and right side version and they should also work on the 1710 monitor (and probably others).

This will work with or without a protective cover installed and you will need an M4 screw 8-10mm long. I would recommend using threadlocker as well.

Tagi