Elixir Vase – watertight FDM vase (no spiral/vase mode) A1 mini friendly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for a watertight FDM print (not spiral/vase mode). The 3MF is for Bambu A1 mini (0.4) + STL for other printers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Files:
STL – universal
3MF (Bambu/Orca) – ready “watertight” profile
Tools used:
Created with MakerWorld-Make My Vase (https://makerworld.com/makerlab/makeMyVase)
Recommended watertight settings:
Nozzle: 0.4 mm
Layer height: 0.20 mm
Wall loops: 3
Infill: 0%
Top layers: 0
Bottom layers: 8
Line width (Outer/Inner): 0.48 mm
Flow ratio: 1.03
Outer wall speed: 80 mm/s
Brim: 10 mm (outer only)
Material notes:
PLA usually holds cold water, but avoid heat/sun/hot water.
For long-term use and warmer environments: consider PETG.
NOT FOOD-SAFE !!!
Leak test:
Fill with water and leave on a paper towel for 1–2 hours.
If micro-leaks appear: increase Flow +1% or temp +5°C, or use 4 walls.
Makes / photos:
If you print it, please post a Make + 1–3 photos and include: printer / material / layer height / watertight test result.