Jonsbo N6 Air Vent Blockers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air Vent Blockers for Jonsbo N6
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I create all my models in my free time. If you'd like to support my work, I would really appreciate a small donation. ☕
ℹ Jonsbo N6 Air Vent Blockers for front, back and sides.
✅ Compatibility
Jonsbo N6 NAS case
⚙ Print settings
No special printing settings required - use standards. 3mf file provided in the files.
nozzle: 0,4
layer: 0,2
supports: no
rafts: no
brim: mousears recommended when material tends to warp
material: PETG over PLA
🔩 Required Tools (depends on the model)
for top cover: 8x2 mm magnets
for front, side and back cover: soldering iron, M3 threaded insert (6 mm) & M3 bolts OR PC case bolts (can be screwed directly into the printed model)
🧊 Models
air vent blocker atx psu fan 120 support ➡ supports 120 mm fan and covers the rest (PSU ATX metal plate required)
air vent blocker atx psu ➡ replaces and covers the open PSU ATX metal plate
air vent blocker front ➡ covers the half, print the same model twice to cover the whole width
air vent blocker side narrow ➡ covers the side, supports one 120 mm fan at the very back side and no fans at the front installed
air vent blocker side wide ➡ covers the side, supports one 120 mm fan at the very back side and no fans at the front installed