Spool holder bracket for Flashforge AD5X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement (or additional) mounting bracket for AD5X spool holders
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 714
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store
Check out my other AD5X replacement parts, mods and upgrades (all free!).
It can be extremely hard to find replacement/additional spool holder brackets for sale, so here's a printable one.
This one is designed to be low-profile like the official ones, and can be attached using the same screws - that's countersunk M3x6 for an unenclosed AD5X; countersunk M3x8 for the official enclosure; or countersunk M3x18 for a Torreva enclosure. I have also successfully used these to mount the spool holders elsewhere (rather than on the printer).
For best results, use ABS or ASA; but PETG also works. PLA is also suitable as long as your spools are mounted outside of any enclosure you may have.
Use a layer height equal to half your nozzle diameter, print it solid (either all-walls or 100% infill), and print slow. A brim is recommended especially if using ABS. Print upright; do not lie them down.