3507 modeli
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…
A simple and effective poop chute / ramp and bucket solution for the Flashforge AD5X as seen in my review video here: There are two files in this listing - the first is a 3MF configured for the Bambu Lab A1 and if you use the drop down to…
Уменьшение стука стола при Z-HOPE: фиксатор гаек ходовых винтов. Нужно два фиксатора на передние стойки (-SIDE) и один на заднюю (-BACK). You need two retainers for the front struts (-SIDE) and one for the rear strut.
The Printed parts are created by Flashforge, I sketched DXF file of enclosure based on it. All panels are made of 3mm polycarbonate or acrylic panels Besides you need to cut the panels which are cut by laser or CNC cutter, you also have…
Clean up your 3D printer workspace with this handy poop bin designed specifically for the Flashforge AD5X. This simple tray catches filament scraps and purge lines to keep your print area tidy. just print and place it underneath your…
The AD5X Super Duper Pooper Chute collection (see the edit from 12-21 below for additional detail) This poop chute is my homage to the one FlashForge has on their site. It attaches to the pooper using the existing screws. It fits with or…
I am attaching the STEP file for possible modifications. It is not HSW compatible. Recommended print settings: PLA, 0.6 nozzle, height 0.42 mm, 2 perimeters, gyroid infill 15%, 4 layers top and bottom, and no support
Flashforge AD5X Spool Number Plates, shaped to the spool spindle ends. Useful to show spool number which is hidden if the spool is installed. Just clips in to existing spindle hex hole at the end. Print Settings: Nozzle Temperature: 220°C…
This design can be printed using one of the AD5X feature - Multi-Color Printing.
I just received the newest Flashforge AD5X multicolor printer and I needed something to redirect the poop chute since the back of the printer is hardly accessible. I tried to design something that bolt on the frame but it was hard to get…
A Flashforge AD5X tool insert to fit into the Flashforge Adventurer 5M Toolkit .
This is printable enclosure for Flashforge AD5X, this model is made by Flashforge. Flashforge will soon releas
Designed for users who want printer waste to drop to the left side of the printer instead of behind it. Installs into the standard mounting using the existing bolts on the rear cover.
This custom FlashForge AD5X enclosure features a clean, functional design finished in Galaxy Black, accented with Green Silk Matte inlays for subtle contrast and depth. The build focuses on durability and visual balance while keeping a…
AD5X Bezel and Stylus Improve your interaction with the touch screen with this stylus. Bezel adds character to your printer and serves as a holder for the stylus.
Wanted a larger bin to hold filament waste. Painted a few spaced support strips on the underside of the raised bottom part (.mf); otherwise very simple print
This is an S-shaped dual clip designed to organize and hold two tubes in parallel. in this case, the extruder cable and the filament tube for the FlashForge AD5X 3D printer. Shape: The S-shape forms two opposing curved channels, each…
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…
As the filament is loading and unloading this cause the PTFE tubing to move and add a ever so slight pull upwards on the ring inside the fitting, this causes it to get stuck on to the tubing, making the standard method of removing the…
IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…
REUPLOAD from official Flashforge Wiki! All Rights at Flashforge! The Files for the official AD5X Enclosure as 3mf File. Print at 0,4 Nozzle , 0,2 layer, min 15% infill and PLA. Works and looks great.
Box for nozzle set AD5X optinal pause in print to add 4 x 8mm magnets
Designed this for my Creality Ender 2 pro. It can be printed on every printer. Update 12.12.2022: New version V2 with engraved L/R added. Check out the other ender2pro upgrades I have designed! Cover, Creality Ender 2 pro by eSeL |…
This is my poop chute design for the AD5X so you can still have access to the power cable and lan connection. I printed the slide standing up with tree supports on build plate only. The basket i printed with normal supports on build plate…
Cubo de calibración de 15x15x15mm
I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.
Magnetic Gridfinity base for mounting with magnets on Flashforge AD5X or any other the steel frame. Great for mounting near the poop shoot to catch that flying debris or for any other Gridfinity container. The back of the base uses either…
Setup for 8mm magnets to hold plate on metal surface. Magnets push in from the top. There is a small layer below the magnet. No glue needed to keep the magnet in place. Magnet can be pushed out by poking through the thin bottom layer.
Created the missing cover for the back of the print bed and merge that with the Noise Reducer that would also go there.
72mm and 73mm openings should fit most larger spools. Most spools with larger openings have a slightly larger diameter on one side, which is why i have 2 sizes loaded into one print. Added a lip to these so that even if the spool opening…
This is modified LED holder from Add an LED Light to Your AD5X | Flashforge Wiki to fit AD5M LED strip https://aliexpress.ru/item/1005008409091282.html You need to remove one connector from strip. Also I'd recommend to remove one…
Italiano: Ho creato questo organizer perché non ho trovato altri progetti simili per le mie stampanti (AD5X e AD5M) senza enclosure. Com'è fatto: L'organizer è diviso in due pezzi: La Staffa di supporto: Si aggancia direttamente sul retro…
I wanted a way to store and ship my cpus i have. The design is inspired by another one from here, but it is 100% my own. There are 5 cpu platforms currently supported. If I will get my hands on others I will upload the designs also. The…
9mm Rugged Ammo Box Collection (50x, 100x, 150x, 225x, 396x) This is a remix of the Rugged Parametric Box by Whity, adapted for 9mm ammunition storage. This version integrates a removable ammo tray and includes all source files for…
I was looking for a Super-Sized fidget star. Since I could not find one, I created this one. The photo shows the new larger size verses the original size. Please comment on your make
Box - outer max dimension 204x170x52mm - inner max dimension 196x146x50mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls infill 30%…
Gridfinity 5x1 bin to hold two pairs of common household scissors. Can be printed without supports.
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. The box holds 6U high bins…
This model use original screw. I have first batch of flashforge ad5x so mine don't have screw so I use double side tape to fixe it on my printer
Made a poop chute collection bin that fits over the power cord and still hold a decent amount of printer poop.
Printed with PETG and 0.4 nozzle with 0.2 Layer height.
I noticed that the IFS wouldn't grab onto the spool correctly when I was using Anycubic filament I had purchased on Amazon. I decided to create an adapter, which seems to work perfectly and hasn't caused any issues after further prints.…
simple poop chute for the ad5x. prints without supports. included .3mf,s for the ad5x, and 2 for bambu p1s Update - just added the enclosure for my ad5x and the chute still works fine
a remix of Rado's “box na odpad filamentu pre FLASHFORGE AD5X” with solid walls. i took the model into blender, removed all the vertices making up the lattice, and filled the remaining holes with new faces. i like the look of the original…
AD5X logo insert, can be printed in different colors separately from the enclosure parts. This will save your print time and avoid poops from multi-color prints. This model has tight tolerance and can be press fitted into the original…
ENG - A basket and slide to capture the excrement of Flashforge 3D printer filaments. It is quite narrow and equipped with a removable basket, so the printer can be moved against a wall. The slide has been designed with grills to remove…
Needed to store the new V2 Nozzles safely other than the huge foam carton each came in - V2 Nozzle case - FlashForge PLA Galaxy Blue LH 0.1mm - 1LH 0.15mm NT 220°C / BT 60°C SpBs 300mm/s Requires - 18 x 88 x 8mm soft foam, - 2x #12 x 18…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
18.08.23 Update: I have added a v2 with slightly optimized filament usage and 2 more screw holes (to make it easier to screw down in different locations if need be). My design for a lightweight, filament-efficient version of a 5x5…
all stock hardware. I used pps-cf filament but anything should work
Official Flashforge AD5X Dry Boxes for Mounting on the Printer, or Standalone. Use the PDF or YouTube Video for Instructions.
Description When putting my standard filament from Jayo / Sunlu on the AD5X I get problems as the spool holder is about 56 mm while the Jayo spools are somewhere between 71 and 75 mm. I created a simple adapter to solve that problem.…
ENG - A basket and slide to capture the excrement of Flashforge 3D printer filaments. It is quite narrow and equipped with a removable basket, so the printer can be moved against a wall. The slide has been designed with grills to remove…
The 5.45x39mm cartridge is a rimless bottlenecked intermediate cartridge that was introduced into service in 1974 by the Soviet Union for use with the new AK-74 rifle. The 5.45x39mm supplemented and then largely replaced the 7.62x39mm…
Replacement frames for Gira System 55. You can choose from single outlet to 5x outlet frames. All my original frames and plates (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements…
Collection of screws (ISO 4017 / DIN 933) including : M5x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
When printing, use 4 wall and 15 infill There is a chain kit x15 and 1 big chain The big chain link will go on the last link before attaching to the rotating hot end @@I have fixed the chain sagging by lifting up one of the connections@@@…
This is a simple poop chute designed for the rear poop discharge port of the Flashforge AD5X. It can be printed using the AD5X without additional supports. Please cut the anti-warping disk after printing. Two 19mm magnets are used for…
I could not find a simple tool holder with vertical storage for nozzles, so I remixed StarscreamUK1312's tool holder with the following changes: Added nipper cap for nipper storage and moved it off the face of the tool holder Pushed the…
This silicagel container holds 250g and is a perfect fit for the NATO ammobox size 7 (~48x24x37cm). Dimensions of the container are: 65 x 140 mm. It requires a somewhat precise printer for the threads (you should be able to reach a…
I made a edit to the standard frame piece that holds the control panel to add a name plate. The nameplate consists of the back place, a ring, and the 4 letters of the printer name. Bringing in the 6 elements together into the slicer as a…
I made these 120 film cases and thought I'd share them with you. There are two variants with space for 3 or 5 rolls. Both the container and lid are chamfered to avoid an elephant foot. The tolerances for the lid have been tested and…
Box - outer max dimension 204x170x102mm - inner max dimension 196x146x100mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls infill…
Collet type expander for filament spool, with an inner diameter of 63mm. Eliminates spool slippage in AMS. I recommend printing from PETG, 2 walls
Print with the flat part of the grip on the print bed with supports. I used a threshold angle of 10 degrees with snug supports! Feel free to get this directly from me here: https://dildesigns3d.etsy.com
4-in-1 Bowden (PTFE) Tube Clips Tidy up your AD5X' PTFE tubes with these clips. 5mm and 10mm versions. Prints in about 3 and 5 minutes respectively. Good project for left-over filaments.
Internal recirculation air filtration duct for AD5X. This model use the same 24V 5015 fan/blower model as the one found on the toolhead with 4 wires. This allows PWM capability and interchangeability. The mod help reduce fumes and…
Collection of screws (ISO 4762 / DIN 912) including : M2.5x 3, 4, 6, 8, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny, consider…
A simple token holder, great for board games. You can storage multiple boxes on each other.
i didn't like any of the other poop shoots for the ad5x, so i made this one after some trail and error. it's nice and wide and doesn't have any catches, also leaves room for the FF enclosure pieces, keeps the vents clear and uses one of…
These parts will keep the lid of your AD5X enclosure open while printing PLA & PETG. It fits the original enclosure and also the extended version. The supports of the channel for the lid is a little annoying to take out but with a little…
Flashforge AD5X Spool Number Plates, shaped to the spool spindle ends. Useful to show spool number which is hidden if the spool is installed Just clips in to existing spindle hex hole at the end. Remove number support after printing with…
Simple design for Flashforge AD5X Spool holders, adding numbers to them to avoid confusion while loading filament. Just push the number to correct position and remember the rod has a hexagon shape, so you might need to rotate the number…
The filament tubes of the IFS can be too long and they push against the top glass plate, making noises, opening the enclosure. This part holds the glass in place. You can install it by simply press it into the holes on the top.
A simple protective case for the Anbernic 35XX “H” handheld. Features: Slim profile hinge dual-latch closure cutout for USB-C charging while it's in the case View port for charging LED status while in the case and charging Prints easily…
Remix of Stamos' case for the Raspberry Pi 3. Made for the Libre Computer AML-S905CX-CC (Le Potato) SBC that has the (mostly) same layout as the Raspberry Pi 3+. This is set up with a hole for the IR receiver as well as indentations for…
I have a new AD5x printer and found a 24vdc LED JST-XH port on the main board. I also had a couple of Daylight on a Matchstick pcb lights. I designed some slip in mounts to screw to the PCB lights and snap into the side rails of the…
Simple low profile wall mount for 100x100mm and 75x75mm VESA monitors. I used it to mount my 34" ultrawide and it worked like a charm. Because of the low profile, 4 screws and angled dovetail it's very easy to install and very strong. Use…
Battletech stackable miniature storage tray 5x5, Stores 25mechs. Trays stack on each other It's stacking compatible with the 4x4 XL tray Fits all mechs if you want more storage density consider the 5x5 REG tray Doesn't stack with Small…
This is best installed with the holes facing upward. Removing the Old One (Optional) You can remove the existing one quite easily, by popping it into the enclosure housing, and disconnecting the 4-in-1 PTFE connector from the extruder. It…
Waste purge collector bin for the FlashForge AD5X.
I wanted some better ergonomics while I played my games. I remixed the grips from STR to fit the RG35XX. It's a snug fit. Printed in PLA with supports on build plate.
Note: This project is not being updated at the moment, I'm working on a different printer based on this but I can't promise any dates for release and it changes a lot of stuff so it's almost a new printer. Still, feel free to download the…
Spool ends for the AD5X to add numbers, shaped to the spool spindle ends. Useful to show spool number which are hidden once you mount filament. Original designer did a great job sizing the posts for the print to clip in to existing…
Wanted a way to store my brushes flat .
I found it difficult to source the same 20x6x2 magnets that Prusa uses in the USA, so I remixed the side storage design to accept these 20x5x2 magnets (actual dimensions closer to 18.9 x 4.6 x 1.8 mm). Required hardware: 29x 20x5x2…
Designed for tools supplied with the printer and https://www.printables.com/model/1425722 I added space for tweezers and free space for glue or lubricant. I printed from TPU with the bottom side up, without supports – I wanted to try…
a taller version of the bin because sometimes the printer throws waste past the shorter one. ive reuploaded the original mounting bracket in this remix even though ive made no changes to it. the original bracket is provided under CC-BY-SA…
I made these 135 film cases and thought I'd share them. Just like my medium format (120) film cases, these come also as a 3 and 5 roll size option. The lid is symmetrical so it fits in either orientation and the registration pins hold it…
Add some texture to the FlashForge AD5X "Logo" part from the enclosure kit. Logo insert. Put a little bit of glue underneath and insert them where they go. The .3mf file is scale a 99% for a better fit.
Improved taller enclosure for the FlashForge AD5X. These alternate parts and additional parts increase the overall height by 64mm, this gives proper room and clearance for the PTFE feed tubes, There is also a cowl that installs over the…
This product is designed to make Flashforge AD5X filament spools more organized and usable. The numbers originally written on the inside can cause confusion during use. Therefore, I added numbers to the slots on the outside in a measured…
This is a small coolections of accessories and mods for the FlashForge Adventurer AD5X There is a: Poop Bucket, Screen Hood & Stylus, Top Extension.
Full Base / Riser with Drawers. Print in PLA or PETG 0,2 - 0,24 Layer Hight - 0,4 nozzle Min. 20% Gyroid Infill for Strenght i build with 35% infill. Part 7 only needed if u dont want drawers, then just print that. Fits the AD5X Like a…
This AD5X recirculation duct and blower fan, A thank you to Jwidess for this design This is designed to be printed with PETG because of chamber heat, you won't need abs or asa because the chamber heat won't get that high. PETG can handle…
I tried to generate all combinations i could fit on my Bambu. Magnets have a tolerance of 6.20, which works perfectly when printing the bins with a 0.6mm nozzle. Scoop A Scoop is the rounded ramp inside the bins. The position of the scoop…
This remixed part provides a mounting for 25x25 mm BZ-251 GPS module on a SpeedyBee Mario 5 frame. As I don't own such GPS, please let me know if it fits.
I didn't like the loose lid, so I made hinges with a stopper and a ventilation stopper for PLA printing. Printed in one piece. You need two pieces, one of which needs to be mirrored. I use 4mm thick plexiglass for the top cover, I don't…
Mechanic Parts Tray 145x170x15mm - Mechanic Stuff It is ideal for storing small parts or screws, for garage, maintenance, or DIY Overall dimensions: 145x170x15mm The model may be imported as a single assembly or grouped object. Before…
