Raspberry Pi 4 Case Cover for NVMe HAT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
cover for the Geekworm Raspberry Pi 4 aluminum case that adds clearance for a GeeekPi M.2 NVMe HAT. Made in FreeCAD.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
A 3D-printed replacement cover for one half of the Geekworm Raspberry Pi 4 aluminum case that provides the extra clearance needed to fit a GeeekPi M.2 NVMe HAT on top of the Pi.
The Geekworm case is a two-piece aluminum shell. This printed cover replaces one side, while the other aluminum half is kept for heat dissipation. The result is an enclosed setup with NVMe storage and passive cooling.
All ports remain fully accessible (USB, Ethernet, HDMI, power, audio jack).
Designed in FreeCAD — source file included if you want to adapt it for a different HAT or case variant.
Designed for
Case: Geekworm Raspberry Pi 4 Model B Aluminum Case
NVMe HAT: GeeekPi M.2 NVMe HAT for Raspberry Pi 4
Board: Raspberry Pi 4 Model B
Print Settings
Material: PC (PLA will get soft because of the heat)
Layer height: 0.2 mm
Infill: 25%
Notes
No supports needed.
Secure with the original case screws through the corner holes.