1 / 3
Ring Doorbell Pro Siding Adapter – Fits 4" Vinyl (No Wedge Needed) — zdjęcie 1
1 / 3

Ring Doorbell Pro Siding Adapter – Fits 4" Vinyl (No Wedge Needed)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flush mount adapter for Ring Doorbell Pro on 4" vinyl siding.

Ocena
0 / 5
Polubienia
0
Pobrania
58
Wydruki
0
Wyświetlenia
182
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Tired of your Ring doorbell sitting crooked on vinyl siding?

This mount is designed specifically for 4" vinyl siding to give your Ring Doorbell Pro a clean, flush, professional install—no awkward gaps, wedges, or shims.


🔧 What it solves

Mounting a doorbell on siding usually leads to:

  • Crooked installs

  • Gaps behind the mount

  • Poor camera angle

  • Water getting behind the unit

This adapter creates a flat mounting surface that matches the siding profile so everything sits tight and looks right.


✅ Features

  • Designed for standard 4" vinyl siding

  • Creates a flat, flush mounting surface

  • Clean appearance (no stacked wedges)

  • Maintains proper camera angle

  • Simple, strong design

  • No supports required


🧠 Print Optimization (No Supports Needed)

This model includes a 0.2mm bridging layer over the screw holes, allowing it to print cleanly without supports.

  • Thin layer bridges the counterbore during printing

  • Screws easily push through during installation

  • No messy support cleanup required

Designed with printability in mind to keep things simple and reliable.


🔌 Compatibility

  • Ring Video Doorbell Pro


🛠 Installation

  1. Remove existing doorbell (if needed)

  2. Position mount over siding

  3. Secure mount to structure (recommended: hit sheathing or stud)

  4. Attach Ring doorbell to mount

💡 Tip: Use exterior-rated screws for durability


🖨 Print Settings

  • Material: PETG recommended for outdoor use

  • Layer height: 0.2mm

  • Infill: 100%

  • Walls: 3 perimeters

  • Supports: None needed

  • Orientation: Print flat


💬 Notes

If you have a different siding size and want a version made, leave a comment—I may update the design.

If you print this, I’d love to see it installed—post a make!

Tagi