Cooler Master Elite Liquid Smart Screen Pump Cover (1.28" LCD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade your Cooler Master Elite Liquid pump with a stylish custom cover designed for a 1.28" LCD/ESP32 smart screen.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Custom Pump Cover with Smart Screen for Cooler Master Elite Liquid (for 1.28" LCD/ESP32)
🛒 Required Components (BOM):
Printed body parts (outer cover and inner mount).
1.28" Round LCD Display (an ESP32-S3 based module with Type-C is recommended).
USB Type-C Cable.
🖨 Printing Recommendations:
Material: PETG, ABS, or ASA.
Layer Height: 0.16 mm - 0.20 mm for smooth edges.
Infill: 15-20% (Gyroid).
Supports: Recommended for the USB port cutout.
🛠 Assembly:
Display Installation: Carefully insert the display board into the inner part of the printed case. Make sure the Type-C port aligns perfectly with the cutout.
Connection: Route the cable from the motherboard (via an internal USB header adapter) or an external port and connect it to the screen.
Mounting: Secure the new cover onto the Cooler Master Elite Liquid pump.
Setup: Configure the information output on the screen using the appropriate software (depending on your ESP32 firmware).
https://docs.zephyrproject.org/latest/boards/waveshare/esp32s3_touch_lcd_1_28/doc/index.html