Cooler Master Elite Liquid Smart Screen Pump Cover (1.28" LCD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgrade your Cooler Master Elite Liquid pump with a stylish custom cover designed for a 1.28" LCD/ESP32 smart screen.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 9
- Makes
- 0
- Views
- 389
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Custom Pump Cover with Smart Screen for Cooler Master Elite Liquid (for 1.28" LCD/ESP32)
🛒 Required Components (BOM):
Printed body parts (outer cover and inner mount).
1.28" Round LCD Display (an ESP32-S3 based module with Type-C is recommended).
USB Type-C Cable.
🖨 Printing Recommendations:
Material: PETG, ABS, or ASA.
Layer Height: 0.16 mm - 0.20 mm for smooth edges.
Infill: 15-20% (Gyroid).
Supports: Recommended for the USB port cutout.
🛠 Assembly:
Display Installation: Carefully insert the display board into the inner part of the printed case. Make sure the Type-C port aligns perfectly with the cutout.
Connection: Route the cable from the motherboard (via an internal USB header adapter) or an external port and connect it to the screen.
Mounting: Secure the new cover onto the Cooler Master Elite Liquid pump.
Setup: Configure the information output on the screen using the appropriate software (depending on your ESP32 firmware).
https://docs.zephyrproject.org/latest/boards/waveshare/esp32s3_touch_lcd_1_28/doc/index.html