Adjustable Furniture Foot – Screw-On or Adhesive Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a height-adjustable furniture foot designed for versatile use.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Description
Adjustable Furniture Foot – Screw-On or Adhesive Mount
This is a height-adjustable furniture foot designed for cabinets, shelves, tables, and other household furniture. The two-part interlocking system allows smooth height adjustment while maintaining high stability.
The adjustable range is approximately 1 cm to 1.5 cm in height.
It helps protect floors from scratches and reduces unwanted movement on smooth surfaces such as wood, tile, or laminate.
The outer diameter of the foot is approximately 37 mm.
A small clearance gap is built into the thread design to ensure smooth rotation. Depending on your printer’s tolerances, you may scale the model in the X and Y axes to increase or decrease this clearance if needed. Both X and Y must be scaled by the same amount to maintain proper geometry and functionality.
Features
Height adjustable (approx. 1–1.5 cm range)
Threaded inner/outer mechanism for smooth adjustment
Dual mounting options: screw-on or adhesive
Anti-slip TPU contact surface for floor protection
Prevents scratches and unwanted furniture movement
Compact design suitable for many furniture types
Assembly:
Two printed parts required (inner + outer component)
Optional: screws for permanent mounting
Optional: strong adhesive pads for non-permanent use
Print Settings:
Inner Part (Mounting Base):
Material: PLA+ (or PETG recommended for heavy loads)
Infill: 20% (Gyroid)
Walls: 5
Top/Bottom Layers: 3
Outer Part (Adjustable Foot):
Material: TPU
Infill: 100%
Provides excellent grip and protects floors from scratches
Recommendations
Use PETG for the inner part if the furniture is heavy or load-bearing
Print threads slowly to ensure clean engagement and smooth adjustment
Tolerances may vary depending on printer calibration
If rotation is too tight or too loose, adjust X/Y scaling slightly (uniform scaling only)
Light lubrication can improve long-term smoothness
