1 / 3
IKEA Kallax Connector Clip – Anti-Wobble Furniture Joiner — zdjęcie 1
1 / 3

IKEA Kallax Connector Clip – Anti-Wobble Furniture Joiner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a simple and effective connector designed to join two IKEA Kallax units together and eliminate wobble.

Ocena
0 / 5
Polubienia
3
Pobrania
38
Wydruki
0
Wyświetlenia
119
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a simple and effective connector designed to join two IKEA Kallax units together and eliminate wobble.

If you have multiple Kallax shelves side by side, you may notice slight movement or instability. This clip locks the units together, improving overall rigidity and alignment.

Key features:

  • Easy to print (no supports needed)

  • Quick installation

  • Improves stability significantly

  • Clean and minimal design

  • Compatible with standard IKEA Kallax shelves

Recommended print settings:

  • Material: PLA / PETG

  • Infill: 20–40%

  • Layer height: 0.2 mm

Tip:
For best results, use at least 2–4 connectors depending on shelf size.

Tagi