1 / 2
8020 Extrusion End Cap 45 Series T Slot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clean push-fit end cap for 45 series (45x45mm) aluminum extrusion (8020-style profiles) to cover exposed ends.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Clean push-fit end cap for 45 series (45x45mm) T slot aluminum extrusion (8020-style profiles). Covers exposed ends for a finished look and keeps debris out of the slots. Friction fit, usually goes on by hand, but a few light taps with a rubber mallet will seat it nice and flush. Prints fine in PLA or PETG, no supports needed.