DeWalt Charger Hooks for Multiboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two simple snaps to mount a DeWalt DCB112 charger (or similar) on the Multiboard with two screws.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DeWalt DCB112 Charger Mount for Multiboard
Marking this as a remix since I simply added holes to the models provided by Multiboard, so can't see myself calling this an original design.
Two snaps, spaced to match the screw holes on the back of a DCB112 charger.
Snap them into the board, run two screws through the holes, hang the charger up.
Probably fits other devices with the same hole spacing (4.5"), but measure first.
Why I made it
I looked at other charger mounts and they were all more complicated than they needed to be. None used snaps which is my preferred method to attach to the board.
Print notes
2 parts, no supports
Standard Multiboard snap settings
Grab two short screws that fit the keyhole slots on your charger
Foot notes
I always include STEP files to make remixing or just playing around with my models easier. If you see them missing please let me know and I will add them!
One day, filament recycling will be viable. This is why I always deboss material names on an inconspicuous face of my models and I encourage you to do the same. When you will no longer have a use for the part you print today, if by then recycling made it to or near our homes, you will know for sure what it was printed out of.
I included 3mf files with text debossing to that end (exported from Bambu Studio).