Nitecore Intellicharger i4 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MultiBuild mount for the Nitecore Intellicharger i4. Same part for top and bottom.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Print two - one for top and one for bottom.
If you just want to attach it directly to a wall, use these attachment points.
The hole spacing is at 25mm intervals. You will minimally need two of those mounted 100mm apart vertically. For more strength, use four of them to create a rectangle measuring 75mm horizontally and again 100mm vertically.
Attaches to a (lite) fix point on a multiboard at 75mm (3 MU) spacing horizontally and 100mm (4 MU vertically).
The fix point rails are a design element created by Keep Making. The MultiBuild license applies to that design feature. If you wish to remix this design and not be bound by the MultiBuild license, remove the attachment slot entirely.
https://www.multiboard.io/license