$30 3.5" & 2.5" USB 3.0 DAS (Drive Attached Storage) w/ Enclosure & BOM | Supports 4× 3.5" OR 4× 2.5" HDDs & SSDs| Up to 40TB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 4-rack DAS fitting 2.5" and 3.5" drives (must be slid back further) - mostly for HDDs but works for SSDs too!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
A 4-rack DAS fitting 3.5" and 2.5" drives - mostly for HDDs but works for SSDs too!
This thing is lit - multiple months of operation and no downtime. I have it plugged into a 2013 Mac Pro where it performs great.
Extremely cheap, less than 30 dollars, and can even be cheaper if you have a USB 3.0 hub lying around.
Printed on a Bambu Labs X1C, but any Bambu-style printer should work with minimal setting changes. Other printers should share their settings.
PARTS:
Uses cheap Dell OptiPlex 7010 9010 9020 USFF 200W Power Supply F200EU-02 L200EU-00 (search on eBay ~$15-$20); https://www.ebay.com/sch/i.html?_nkw=Dell+OptiPlex+7010+9010+9020+USFF+200W+Power+Supply+F200EU-02+L200EU-00&_sacat=0&_from=R40&_trksid=p4624852.m570.l1313
USB-A 3.0 to SATA Adapter Cable - Supports 2.5"/3.5" SATA HDD/SSD ($4-$8); https://www.aliexpress.us/item/3256805868380641.html
USB Hub,USB Splitter,USB 4-Port Extender Multiport USB Adapter,USB 3.0 Hub,4-Port USB Hub USB Splitter USB Expander for Laptop, Xbox, Flash Drive, HDD, Console, Printer, Camera,Keyborad, Mouse ($4-$8); https://a.co/d/04ahE7u0
12V 5A DC Power Pigtail Barrel Plug Connector Cable 5 Pairs, 2.1mm x 5.5mm Male Female DC Pigtail Connectors for CCTV Security Camera and 12V Power Supply Adapter ($4-$8); https://a.co/d/05h8YyN2
INSTRUCTIONS:
Crimp and connect 12V with a DC barrel splitter.
Adapt 6-pin, take 12V (white is 12V) for drives, and GND -> PSU_ON (green)
Screw in and assemble drives in trays.
Screw in drive bay caddy (after mounting drives in caddy)
Connect the USB SATA cables to the USB hub.
Connect the DC barrel 12V to 12V lines INDIVIDUALLY.
Route the extender's cable through the back hole.
Connect DAS and confirm your drives are detected.
You're done
