1 / 4
80mm Passive Radiator printed in PETG/PLA and TPU — zdjęcie 1
1 / 4

80mm Passive Radiator printed in PETG/PLA and TPU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a DIY 80 mm passive radiator designed for custom speaker builds.

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
169
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Video:
https://makertube.net/w/vANtT1WsL4XTv4JoAHnRSv

DIY 80 mm Passive Radiator for Custom Speaker Projects

  • 80 mm diaphragm diameter

  • Mounting with 6 × M4 screws

  • Tunable resonance frequency by adding mass

  • Designed for multi-material 3D printing

Tuning

The passive radiator must be tuned by gluing a weight into the designated cavity.

  • no mass added  ≈ 140 Hz resonance frequency

  • 21 g added mass ≈ 95 Hz resonance frequency

  • more  ≈ deeper frequency

You can experiment with different weights to achieve the desired tuning for your enclosure and speaker design.

Print Instructions

This model is intended for multi-material printing.

  • Print the rigid body in PETG or PLA

  • Use 3–4 perimeters

  • 20–30% infill is recommended

Once the flexible ring (the diaphragm suspension) begins, switch to:

  • Soft TPU (I used Fiberlogy FiberFlex 40D)

Important

Set the Z-seam position to "Random" to prevent pinholes in the flexible surround.

After printing, inspect the TPU surround carefully for airtightness. If necessary, seal any tiny leaks with Plasti Dip or a similar flexible rubber coating.

A perfectly airtight surround is essential for proper passive radiator performance.

Notes

This passive radiator is intended for DIY speaker enthusiasts who want to tune their enclosure by adjusting the moving mass. Please give feedback, Makes and Likes!

Tagi