80mm Passive Radiator printed in PETG/PLA and TPU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a DIY 80 mm passive radiator designed for custom speaker builds.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Video:
https://makertube.net/w/vANtT1WsL4XTv4JoAHnRSv
DIY 80 mm Passive Radiator for Custom Speaker Projects
80 mm diaphragm diameter
Mounting with 6 × M4 screws
Tunable resonance frequency by adding mass
Designed for multi-material 3D printing
Tuning
The passive radiator must be tuned by gluing a weight into the designated cavity.
no mass added ≈ 140 Hz resonance frequency
21 g added mass ≈ 95 Hz resonance frequency
more ≈ deeper frequency
You can experiment with different weights to achieve the desired tuning for your enclosure and speaker design.
Print Instructions
This model is intended for multi-material printing.
Print the rigid body in PETG or PLA
Use 3–4 perimeters
20–30% infill is recommended
Once the flexible ring (the diaphragm suspension) begins, switch to:
Soft TPU (I used Fiberlogy FiberFlex 40D)

Important
Set the Z-seam position to "Random" to prevent pinholes in the flexible surround.

After printing, inspect the TPU surround carefully for airtightness. If necessary, seal any tiny leaks with Plasti Dip or a similar flexible rubber coating.
A perfectly airtight surround is essential for proper passive radiator performance.
Notes
This passive radiator is intended for DIY speaker enthusiasts who want to tune their enclosure by adjusting the moving mass. Please give feedback, Makes and Likes!