Hex Bolt & Nut Covers | M3 to M16 Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight, support-free hex caps for M3-M16 bolts and nuts. Keeps hardware protected while allowing wrench access!
- Ocena
- 5 / 5
- Polubienia
- 330
- Pobrania
- 730
- Wydruki
- 3
- Wyświetlenia
- 2240
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
BOM: Printed with ROSA3D Starter PLA Red
Protect your exposed hardware, prevent scratches from sharp threads, and give your projects a clean, finished look with this comprehensive set of bolt and nut covers. Covering metric sizes from M3 all the way up to M16, these caps are designed to snap snugly over standard hex heads.
Unlike round dome caps, these covers feature a functional hexagonal exterior. This clever design means you can still use an adjustable wrench or spanner to tighten, loosen, or hold the fastener without having to remove the protective cover first!
Key Features:
Complete Metric Set: Includes individual, perfectly sized models for M3, M4, M5, M6, M8, M10, M12, M14, and M16 fasteners.
Wrench Compatible: The external hexagonal profile lets you apply torque with a standard adjustable wrench directly over the cap.
Aesthetic & Protective: Hides ugly, rusted, or mismatched hardware while keeping dust and moisture out of the threads.
Ultra Lightweight: The hollow, domed design uses minimal filament while remaining structurally strong.
Printing Instructions:
Orientation: Print flat on the bottom base (dome facing upwards).
Supports: NONE. The internal geometry is carefully angled to print perfectly without any support material.