10RackCore 10-Inch 1U TP-Link LS1008G Switch Mount + Storage Drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clean 1U mount for the TP-Link LS1008G switch with an integrated drawer for RJ45 dust covers and small accessories.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
10RackCore 10-Inch 1U TP-Link LS1008G Switch Mount + Storage Drawer
This 1U rack mount was designed to install the TP-Link LS1008G 8-port unmanaged switch inside a standard 10-inch rack.
Because the LS1008G only occupies part of the available width, the remaining space is used for a small removable storage drawer. The drawer is ideal for RJ45 dust covers, rack screws, labels, adapters, and other small networking accessories.
Features
Designed specifically for the TP-Link LS1008G
Fits standard 10-inch rack systems
Occupies one rack unit
Integrated removable storage drawer
Front access to all eight Ethernet ports
Open design for airflow and cable access
Part of the modular 10RackCore ecosystem
Included Files
1U TP-Link LS1008G switch mount
Removable accessory storage drawer
Printing Recommendations
Print the mount and drawer separately
Recommended material: PLA, PETG, or ASA
Recommended layer height: 0.20 mm
Recommended infill: 20% or higher
Supports may be required depending on print orientation
Allow the parts to cool completely before testing the drawer fit
Printer tolerances can vary. Minor scaling or sanding may be needed for the preferred drawer fit.
The TP-Link switch, rack, Ethernet cables, mounting hardware, dust covers, and accessories shown in the photos are not included.
TP-Link and LS1008G are trademarks of their respective owner. This is an independently designed accessory and is not manufactured, sponsored, or endorsed by TP-Link.