Fluted Bell Lampshade & Faux Flower Vase — Free Sample Pack (E27 / E14 / B22) by AVAGLO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fluted bell lampshade + matching vase. E27 and E14/B22 mounts. One piece, no supports, fits a 220mm bed
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — NoDerivatives
A fluted bell shade that prints in one piece, with no supports plus a matching vase and both common lamp fittings.
I am Dan, also known as Layer3D Creations here on Printables. If you have used my tuned slicer profiles, you know I care about prints coming out right first time. This pack is a free sample from AVAGLO, a parametric lampshade and vase generator that I have built and every file here comes from this and is a sealed, manifold-correct solid, with layer seams hidden inside the pattern and mount bores sized for real world fittings.
Print it, sell it, keep it. Details at the bottom.
Get AVAGLO → https://ko-fi.com/avaglo/shop
WHAT IS IN THE PACK
Avaglo_bell_208x210mm_E27.stl - the bell profile with a soft fluted swirl, as a lampshade. E27 mount, the standard large screw fitting (40 mm bore).
Avaglo_bell_208x210mm_E14_B22.stl - the same shade with the smaller E14 / B22 mount, the small screw or bayonet fitting (29 mm bore).
Avaglo_bell_208x210mm_Faux_Flower.stl - the same bell shape as a display vase. No lamp mount, bottom sealed into a solid flat floor.
Printed size: 208 × 208 × 210 mm. At 208 mm across it fits any bed of 220 × 220 mm or larger. These printers include Creality Ender 3 / K1, BBL A1 / P1 / X1, Flashforge Adventurer 5M series, Anycubic Kobra series, and up.
PRINT SETTINGS (tested)
Walls / perimeters: 2
Infill: 0% makes these hollow shades because infill can ruin the glow
Supports: none, nothing here needs them
Cooling: PLA 100% fan, PETG 30–50%. Fan off for the first 2–3 layers either way
Seam position: Aligned or Back Aligned
Material: PLA or PETG. Whilst I do recommend that you use white or natural as this glows best, use whatever light colour takes your fancy, for this example I used a light cyan and white gradient.
Do not use Vase / Spiral mode. Every file here is exported as a solid model, and standard slicing is what makes the mount bore come out the right size.
A TIP THAT SAVES HOURS
Textured shades can send OrcaSlicer and Bambu Studio into hours of unnecessary "gap fill". Switch it off:
Quality → Wall generator: Classic
Strength → Infill → Apply gap fill: Nowhere
Strength → Infill → Filter out tiny gaps: 999999
On a comparable AVAGLO shade this cut the print from 8hrs 40m to 5hrs 10m, and from 139 g to 96 g of filament, with no change at all to the shape of the model.
LED BULBS ONLY
Incandescent and halogen bulbs run hot enough to soften a printed shade. especially one made with PLA due to it's lower glass temperature. LEDs stay cool. You are responsible for the safe assembly of any printed light fitting.
Is the vase watertight? The model is a sealed solid but whether an FDM print holds water depends on your printer, settings and other factors beyond, not the geometry. Treat it as decorative (dried flowers, artificial stems, pampas grass). Seal the inside with a clear lacquer or food safe epoxy first if you want to use water with real flowers.
WANT TO DESIGN YOUR OWN?
This is just one shade of many. AVAGLO can make endless variations with your dimensions, your bulb fitting, your bed size, your pattern with a live 3D preview and it#s own glow simulation, then exports a guaranteed-manifold STL. It also builds matching faux-flower vases, and can wrap your own photograph around a shade as a lithophane.
One HTML file. Runs entirely offline, forever. No cloud, no subscription, no CAD skills.
Get AVAGLO → https://ko-fi.com/avaglo/shop
LICENCE, IN SHORT
Print these as much as you like and sell the physical prints, markets, online shops, marketplaces, no royalties. I just ask that you recognise and credit AVAGLO as the designer in your listings or at your stall. Please DO NOT sell or redistribute the STL files themselves, and if you pass the pack on, pass it on whole, free, and credited. Full terms are in the included licence file.
If you print one, tag @Avaglo on Instagram, TikTok or Reddit — posting a Make on this listing also helps other makers trust the files. It genuinely makes my day.
There shouldn't be any problems, but if something does go wrong, just message me and I'll do my best to sort it out.
Happy printing!
Dan
