Liczymy pasujące modele…
Halterung für WERA Tool Check Plus Passend zu: S37x9 und Skadis Lochwände 2 Modelle: - Tool-Check Plus - Short-Bits - Tool-Check Plus - Long-Bits Allgemein: - Aussenmasse: 221x75x75 - Reihe 1 = 20° => 20-Bits / Short-Bits und Long-Bits -…
Halterung für Bit-Ratschen: 10mm / 8mm / 6.3mm / 1/4" 4kt Passend zu: S37x9 und Skadis Lochwände Allgemein: - Aussenmasse: 221x75x75 Ratschen: 10mm Bit - BGS 6656 8mm Bit - Koken 121 8mm Bit - Garant 67 66 75 10mm Bit - KS 503.4673 8mm…
This allows the SB2209 USB can-bus cable to stay in place with a pair of cable ties.
2x Halterung für WERA Tool Check Plus - 37x9er Lochwände oder Skadis Passend zu: S37x9 und Skadis Lochwände 2 Versionen: Short- und Long-Bits Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 -…
Halterung für Nadelfeilen, Handsenker und Bohrfutter Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 1-3x 3D-Print "S37x9…
Stifte Halterung “overloaded” für 37x9 oder Skadis-Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 1-3x 3D-Print "S37x9 Adapter" B221 oder Center -…
Halterung für das PB 225er System - 8mm Steck- Wechselklingen Passend zu: S37x9 und Skadis Lochwände Das PB 225er System => Die besten Schrauber Bits für den Akku-Schrauber !!! - Durch den runden Schaft fast keine Torsion => gute…
Halterung für Torx - Schraubenzieher von PB Mit 3 Griff-Typen kompatibel: Classic, Multicraft und SwissGrip Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" -…
Spezial-Halterung: C6.3 Ratschen/Halter für PB + WERA Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 2x 3D-Print "S37x9…
Spezial-Halterung: 8mm + ¼" Ratschen/Halter Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 2x 3D-Print "S37x9 Adapter"…
Halterung für das PB 215/53er System - Steck- Wechselklingen Passend zu: S37x9 und Skadis Lochwände 4 Versionen: PB 215 only Nr. 80 PB 215-System: 2x Handriffe Mittig / 39x Wechselklingen Nr. 81 PB 215-System: 2x Handriffe Mittig / 39x…
Halterung für spezial Ratschen: 1/4" 3/8" 1/2" von BGS und KS-Tools Passend zu: S37x9 und Skadis Lochwände Allgemein: - Aussenmasse: 221x75x75 Ratschen: - BGS Slim-Ratschen: Nr. 610 / 611 / 612 Bilder => ohne Griff und überdreht - BGS…
Wanted to avoid purchasing a new tool head control board but wanted better performance than what was available form orm Stock Stealthburner. Mount has been test fit with an A4T tool head on a XOL carriage, but should also work without…
This support allows the use of a PG7 cable gland on the StealthBurner toolhead when using the SB2209 CAN board, providing a cleaner, safer, and more reliable cable management solution. The design properly guides the CAN cable, reducing…
This design bring you the capability for a Voron Trident with Galileo2 and EBB SB2209/2240 to have a chain mount and a relief connector for the CAN Cable. Printing information No need support but ... ABS or ABS-CF 5 walls & top/button 40%…
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…
The project has been adjusted to the EBB SB2209 USB board. Please use an empty PH connector (you should have spares anyway, delivered with a board) to isolate the piano wire from the port. Piano wire available on amazon My 3d design…
The left side guard of the front body is removed for the pin clearance. Attached a vented cover to be used together with the body.
Quick and dirty SB2209/2240 CAN bus umbilical mounting post for Galileo 2 Extruder. Use a M3x50 SHCS to mount the post instead of the cable chain holder, then fixate the umbilical with a zip tie. Print without support to keep the cavity…
this is a modified version of the Galileo 2 extruder front that allows the use of the bigtreetech sb2209 usb board. The original prevented the board to fit so I have adjusted a few areas to enable the board to sit correctly.
https://github.com/juliusjj25/G2E-Filametrix-Lever-Switch-Mod Without supports. In one of the latest updates, Fusion 360 significantly reduced the model quality when exporting to STL (fewer polygons). Because of this, I now export from…
Use with the CW2 cable bridge.stl from BTT. Too big to work with the regular cable cover so i added a cutout. You'll have to print it with supports. Add two M3 heat-set inserts into the clamp. Secure with M3x16 screws (or longer, but they…
Modified to work with 6.3mm balls i got from an old bike bearing. The original description also says that it's not compatible with original hotend mounts, but that's what I'm using and it works so idk.
All the models I could find that used " PG Cable Gland M12 " for the SB 2240/2209 CANBus cable and worked with the Galileo 2 Extruder didn't work as expected. Some had a design flaw that caused more stress on the cable than relief; others…
I found a ton of Hilti B22 battery hanger STL's but none for the tool itself. So I broke out the Micrometer, fired up Fusion 360, and designed one to share with anyone that needs one. I printed this model out of Bambu Labs basic PLA with…
This allows the SB2209 USB can-bus cable to stay in place with a pair of cable ties.
The original SB2209 misalignment protector didn't work for me with G2E (using https://github.com/IRTrail/G2E-Filametrix ). The raised part next to the pins doesn't fit inside the opening the G2E body leaves. This version flattens the part…
Designed for the magazine to lock in to the pouch the same way as it goes into the magwell. For build settings, I used PETG with a 0.6mm nozzle, 25% infil, 3 walls, and .40mm layer height. This was built for a 6mm thick leather belt. I'm…
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount with a cutout for the cable/screw in portion. Make sure to route the…
Updated - CW2 main body - ebb_sb2209/2240 with filament_sensor to reflect the lastest version.
A battery holder for Hilti B22 Battery for the workshop, garage or your work van. Importen info about Gcode: It print with a 2mm brim to add strengh to bed. I just took a deburrs on the bottom edge and it was perfect after. The 2 holes to…
To get the SB2209 USB to fit my Galileo2, I de-soldered the I2C connector and it fits perfectly. The cap-head bolt in this is M3x40, so you don't have to find an impossible M3x50. It has a zip-tie routed slot as well as steel cable mounts.
Print laying down, some support is needed due to orientation. Use temp resistant material I used petg but i would suggest asa or abs. So far it held up. This was for a 2010 model check if others will use the same.
I wanted a pg7 mount to route the cable out behind the stealthburner, horizontally centered on an enderwire (switchwire) build. The pg7 cable does not run into the vertical extrusion on either side and is a decent route to push the…
As many others, I've encountered high temps (above 85c) on my EBB2209 toolhead board, for Voron CAN (2.4 R2 Pro machine). I'm using Stealthburner with CW2 extruder and there was no option that suited my needs, which is CW2 + 3010 (24V)…
Halterungen für die 10er BitBlocks von PB Swiss Tools ( PB C6 970 ) 2 Versionen: - Short-Bits => 8x BitBlock + 8x Bohrungen für Short Bits C6.3 - Long -Bits => 8x BitBlock + 8x Bohrungen für Long Bits E6.3 Montage Varianten / Anwendung:…
Halterung für die Druchschläge- und Meissel-Sets von PB Swiss Tools Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 1-3x…
This is a Voron StealthBurner mod to allow the printer head boards like SB2209 and others to work more cooler. This is done to a 350mm Voron 2.4 but can fit other print sizes using SteathBurner. Print with supports like on the picture.
Warnings: ⚠ Please read the powerbank module instructions ⚠ Never solder to batteries ⚠ Assemble and use at your own risk ⚠I reccommed getting brand new, reliable batteries from a well known brand, such as Panasonic, LG, Samsung. 2 x…
DIY-Solids zum selber zeichnen / bearbeiten Passend zu: S37x9 und Skadis Lochwände 7 Versionen: 1x B73 1x B147 2x B184 3x B221 Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" 2. Skadis => 1-3x…
Remade the entire dragchain support to hold the SB2209 USB plug in place. I felt like it could be ripped off or worse and since that cable is not dragchain-rated, I'll use zipties to tie it to the bowden tube. Might make a hole or a…
If you are using a BTT SB2209 toolboard, you will also have to print their Stealthburner motor plate, as it provides more room for the toolboard. As such, they have made available a cover for this that fits perfectly with the new motor…
A very simplistic pug mount for g2e working with btt sb2209 can
Voici un remix d'un stealthbuner main body compatible avec goliath air, lgx lite, sb2209/40, et cpap. Récupérer le reste des pièces des 2 fichiers d'origine.
Halterung für Noga Handentgrater, Noga Dreikantschaber Schaber, Noga Senker, Automatik Körner, Rico-Marker HM-Reissnadel Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix…
Halterung für Nadelfeilen, Handsenker und Bohrfutter Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 1-3x 3D-Print "S37x9…
Stifte Halterung “overloaded” für 37x9 oder Skadis-Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 1-3x 3D-Print "S37x9 Adapter" B221 oder Center -…
Halterung für das PB 225er System - 8mm Steck- Wechselklingen Passend zu: S37x9 und Skadis Lochwände Das PB 225er System => Die besten Schrauber Bits für den Akku-Schrauber !!! - Durch den runden Schaft fast keine Torsion => gute…
Halterung für Schlitz - Schraubenzieher von PB ~ ab Jg. 1953 Mit 3 Griff-Typen kompatibel: Classic, Multicraft und SwissGrip Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix…
Halterung für Torx - Schraubenzieher von PB Mit 3 Griff-Typen kompatibel: Classic, Multicraft und SwissGrip Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" -…
A clip that will slide onto your Digitrax DCS 240 or DB 220 to keep your cables nice and organized. Will hold the three cables coming out the front of your booster. (I'm not sure if it will fit the older Digitrax boosters - I think they…
CAN Cable holder for a PG7 strain relief compatible for the Stealthburner toolhead with the Galileo2 extruder and Big Tree Tech SB2240 / SB2209
Spezial-Halterung: C6.3 Ratschen/Halter für PB + WERA Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 2x 3D-Print "S37x9…
Spezial-Halterung: 8mm + ¼" Ratschen/Halter Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 2x 3D-Print "S37x9 Adapter"…
This remix was made to allow usb connection with BTT SB2209 toolhead board as the original model blocks the USB input. PUG Clamp and Bottom Standoff parts as exactly the same of the original model, but I provided them here for…
After buying and installing my SB2209 RP2040 onto my extruder, I realized that the cable cover didn't close. I tried to look everywhere but couldn't find an official version provided by BTT even though it is shown in the instruction…
Halterung für das PB 215/53er System - Steck- Wechselklingen Passend zu: S37x9 und Skadis Lochwände 4 Versionen: PB 215 only Nr. 80 PB 215-System: 2x Handriffe Mittig / 39x Wechselklingen Nr. 81 PB 215-System: 2x Handriffe Mittig / 39x…
Halterung für spezial Ratschen: 1/4" 3/8" 1/2" von BGS und KS-Tools Passend zu: S37x9 und Skadis Lochwände Allgemein: - Aussenmasse: 221x75x75 Ratschen: - BGS Slim-Ratschen: Nr. 610 / 611 / 612 Bilder => ohne Griff und überdreht - BGS…
I modified the module to use 3mm spring steel, for use with toolchanger umbilicall mods.
Same model as before but with a hexagonal pattern cut out to allow for better airflow to the board
ECAS PTFE tube connector added to Voron Stealthburner for use with BigTreeTech SB2209 I have adapted main_body, latch and cable_cover from Voron Stealthburner for BigTreeTech SB2209 USB. It may also be compatible with SB2209 CAN.…
I found the existing options for cable relief of the BTT EBB SB2209 USB were lacking in one way or another. So I made my own. My goals: Relieve strain on the umbilical cable. Compatible with the PUG system. Allow greater access to the…
UPDATE: I redesigned the toolhead side of the mount to prevent the break of cable. I printed in PLA with standard Voron settings, because I print only PLA with my Voron. Materials you need: -2x M3 heat insert (I used the standard Voron…
I remixed the ventilated pcb cover for the EBB SB2209 USB V1 to mount a fan because the RP2040 kept overheating. Use 4xM3 heatset inserts and M3x14 screws to mount a 3010 5V fan, the fan can be plugged into the unused USB expansion ports…
To solve the issue of the EBB SB2209 USB cable coming loose during setup—where even the slightest bump could disconnect it—I took @Kahn Tigre’s original part of his wrap-around USB mount and modified it. I extended the design by adding a…
Shackle spacers to fit a stock length T-100 pickup shackle for use on a Mazda B2200 pickup using the Belltech lowering springs. These springs are longer than the stock Mazda springs and thus cause the spring shackle to contact the frame.…
Es werden noch 2 Schlosserscheiben für M3 und eine M3x30mm DIN912 benötigt. Die zwei Schlosserscheiben werden mit einem leichten Fett oder Ölfilm belegt und zwischen Halter und Fahne montiert um ein reiben von Kunststoff auf Kunststoff zu…
The red model. White is original. Orient to print as shown in the photos. Use supports on build plate. Here printed in PolyLite ASA.
Love the model but don't want the logo on the outside of my printhead.
G2 Galileo 2 SB2209 USB tool board fan 30mm with heat set inserts.
It didn't help with the high temperature of the toolhead mcu temperature but it's lighter.
This was a remix of the original it did not fit my Stealthburner there was a 4MM gap missing and it would not fit so I added the missing 4MM gap for my Stealthburner so its fits perfectly now
A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 CAN or SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. Fan cover BOM 4x M3x12 BHCS - DON’T OVER-TIGHTEN The bolts are…
Hello everyone, I had some spare 25x10mm 4-pin fans from Bambulab, and I thought it was a shame to throw them away since they were still functional. With a bit of soldering and some reverse engineering, I managed to mount them on the…
You will need 2 M3x5x4 Thread Inserts (for Voron): https://cnckitchen.store/products/made-for-voron-gewindeeinsatz-threaded-insert-m3x5x4-100-stk-pcs
Printed this in PLA resin and has lasted me over 5 years.
Didn't like the other alternatives, so I made my own modifications to the design to accommodate the protruding USB-C port on sb2209 (rp2040). The only modified part is the mount. All other files are unchanged from the original.
BOM: 3x M3 Tool head: https://github.com/Armchair-Heavy-Industries/Xol-Toolhead Board: https://github.com/bigtreetech/EBB/tree/master
Freecad model attached in case anyone needs to adjust the clearance for their print.
The Formbot kit references a main body to house the BigTreeTech EBB SB2209 board that requires a slightly bigger PCB cover. This fits the model found on the Formbot GitHub page, but with the openings to allow for cooling of the PCB. If…
Remixed to fit different extruder frame (with angle cut at the botton)
Wanted to avoid purchasing a new tool head control board but wanted better performance than what was available form orm Stock Stealthburner. Mount has been test fit with an A4T tool head on a XOL carriage, but should also work without…
print as is with bed only support abs 15 mins @ 9k 500mm
Dieses Modell habe ich für eine Carl Zeiss 27630 OP Lampe entworfen. Die Lampen haben original eine B20 Fassung. Glühbirnen für diese Fassungen sind jedoch nicht energieeffizient und schwer zu bekommen. Mit der Fassung können B22 Lampen…
LX-PB225M power bank module for 3D printing. Accurate dimensional model for custom enclosures, prototypes
Dies ist ein angepasster Front Body für den Bondtech LGX Lite PRO . Da sich die Geometrie des PRO vom Standard LGX Lite unterscheidet, passte das Original nicht mehr. Ich habe das Design modifiziert, damit der LGX Lite PRO perfekt sitzt.
This support allows the use of a PG7 cable gland on the StealthBurner toolhead when using the SB2209 CAN board, providing a cleaner, safer, and more reliable cable management solution. The design properly guides the CAN cable, reducing…
Swiss3DC hotends use dual heater with rather big connectors. To have enough space below the cover, the fan is moved a little bit
Made a small change of SB2209 anchor for clockwork2. During my assmbly I couldn't find an anchor component that fits both spring steel and an umblical. So I simply combined two I found on the website. One from the official clockwork2 stl,…
BMW e46 M54B22 Intake vacuum/smoke test adapter Made it to test for any vacuum leaks. Fits e46 m54b22 or other cars with intake diameter equal to 80mm Supposed to be used with Standard automotive valve. (Unfortunately the rubber one is…
Wall-mounted battery holder for Hilti B22 lithium-ion batteries. Designed for clean workshop organization – keeps batteries off the bench and always within reach. ✅ No supports needed ✅ Printed in PETG for durability ✅ Tested fit – 100%…
Wall-mounted battery holder for Hilti B22 lithium-ion batteries. Designed for clean workshop organization – keeps batteries off the bench and always within reach. ✅ No supports needed ✅ Printed in PETG for durability ✅ Tested fit – 100%…
