Roll With It Flexi Armadillo Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place flexi armadillo fidget with two hinges and a satisfying wiggle. AMS or single colour, no supports.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
This chunky little armadillo is a print-in-place fidget with a body split into three parts, joined by two smooth fidget hinges. That gives it a proper satisfying wiggle side to side without any assembly at all; it comes off the plate ready to play with. It's a lovely desk companion for anyone who likes something to keep their hands busy, and it's a friendly first flexi print if you've not tried one before.
Print it in AMS multicolour for the two-tone look with a cream face and legs against a warm rusty body, or go single colour if you're not running a multicolour setup; it still looks great. No supports needed and it sits flat on the bed, so it's an easy one to queue up overnight. Works nicely as a shelf piece, a drawer fidget, or a small handmade gift for someone who likes a slightly odd little animal.
Filament Colour & Material
Plywood is ideal here as the hinges move freely and it holds the rounded shapes cleanly. For the AMS version, a rust or terracotta brown against cream or off-white creates that classic armadillo look with a nice contrast. Alternatively, a single warm burnt orange or sandy tan works well too, maintaining a nice readable shape.
Print Settings
Print in Place (no assembly required)
Supports: No
Wall line count: 2 or more
Infill: 15%
Layer height: 0.12mm
Line width: 0.6mm for default, initial, and outer walls
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: