Spool Desiccant Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool-flush desiccant holder for 3-5mm silica beads. Sits inside the hub so vacuum bags still stack flat on top.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The "Set It and Forget It" Spool Desiccant Holder 🎯
You vacuum seal your filament. You stack the bags neatly. And then you realize your desiccant canister sticks up just enough to make the whole thing awkward. I wanted something that disappeared inside the spool hub, flush enough to stack bags cleanly on top. So I designed one.
🟩 𝗪𝗛𝗔𝗧 𝗠𝗔𝗞𝗘𝗦 𝗜𝗧 𝗪𝗢𝗥𝗞
▸ 𝗦𝗽𝗼𝗼𝗹-𝗙𝗹𝘂𝘀𝗵 𝗣𝗿𝗼𝗳𝗶𝗹𝗲 — 2" diameter, 2.4" tall. Designed to sit inside a standard spool hub without poking above the rim — so your vacuum sealed bags stack flat, the way they're supposed to.
▸ 𝗣𝘂𝗿𝗽𝗼𝘀𝗲-𝗕𝘂𝗶𝗹𝘁 𝗳𝗼𝗿 𝟯-𝟱𝗺𝗺 𝗗𝗲𝘀𝗶𝗰𝗰𝗮𝗻𝘁 𝗦𝗽𝗵𝗲𝗿𝗲𝘀 — The diamond mesh pattern (2mm x 3mm openings) lets moisture through while keeping your beads locked inside. Grab a bag of 3-5mm silica spheres off Amazon and you're ready to go.
▸ 𝗟𝗶𝗱 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝗱 — The 3MF file contains the container, the lid and a fill funnel. Print them, fill, seal, drop in. Done.
▸ 𝗧𝗵𝗿𝗲𝗲 𝗣𝗹𝗮𝘁𝗲𝘀, 𝗛𝗼𝘄𝗲𝘃𝗲𝗿 𝗬𝗼𝘂 𝗪𝗮𝗻𝘁 𝘁𝗼 𝗣𝗿𝗶𝗻𝘁 𝗜𝘁 — The 3MF is laid out on three ready-made plates so you can run all the parts together in one go or print them one at a time, whichever suits the spool you have loaded.
▸ 𝗢𝗿𝗶𝗴𝗶𝗻𝗮𝗹 𝗗𝗲𝘀𝗶𝗴𝗻 — Modeled from scratch in SolidWorks. Not a remix.
🟩 𝗣𝗥𝗜𝗡𝗧 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦
No supports required · 0.20mm layer height · 10% gyroid infill · 2 walls · PLA
Got a spool with an unusually sized hub? Drop the dimensions in the comments and I'll see what I can do. Happy drying! 🎯