Face Peg Wall Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strong and simple wall hanger that uses a normal wooden dowel
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
Printing recommendation
Print the model standing vertically, not lying flat.
This is important because the layer direction makes the part stronger for the way the force works on the wall. Printed vertically, the layers behave more like a wall structure and the hanger becomes much more reliable.
Suggested settings:
Material: PLA, PETG, or ABS
Layer height: 0.2 mm
Walls/perimeters: 3 or more
Infill: 25–40%
Supports: depends on your slicer and orientation
Orientation: standing upright for best strength
What you need
Printed wall mount
Round wooden dowel 22mm
6 screws for mounting to the wall
Wall plugs if mounting into brick, concrete, or plaster
Optional: sandpaper for the wood end
Assembly
Print the wall mount vertically.
Cut a wooden dowel to the length you want.
Insert the dowel into the mouth/nose opening.
Screw the printed part firmly into the wall.
Hang your bags, clothes, or towels.