BIQU PopCap Exhaust Adapter for Snapmaker U1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snapmaker U1 PopCap exhaust adapter for 4" hose filtration systems for printing ASA, ABS, PETG, etc to vent fumes
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing ASA, ABS, PETG, or other materials and looking for a way to manage fumes, odors, or enclosure exhaust on your Snapmaker U1? This adapter provides a 4-inch duct connection for the BIQU PopCap and can be used with external filtration, fume extraction, or exhaust systems.
BIQU PopCap Exhaust Adapter for Snapmaker U1
NOTES:
I designed, drew and started the 3D files and then used ChatGPT to fix some dimensions and resize some flangework. So, to be 100% accurate, I clicked the "AI" flag.
The logo is NOT in the print files - but, below, I go through the steps I used to add a logo on mine.
This adapter connects the BIQU PopCap enclosure for the Snapmaker U1 to an external filtration or exhaust system using approximately 4-inch ducting.
The design uses a wide rectangular intake that transitions smoothly into the round hose outlet. An optional internal backing plate spreads the mounting load across the PopCap rather than concentrating it around individual fasteners.
There is no single mandatory way to install this. The mechanically clamped installation is the method I prefer, but an adhesive-only installation is also possible. The goal of this guide is to explain both what I did and why I did it, so you can choose what makes sense for your installation.
But first, some beauty shots.


Leave me a tip? Don't leave me a tip?
These files are provided free under the listed license. If the design or documentation helped you, you may leave an optional tip to support future prototyping, filament, testing, free 3D-printing files and more coffee:
License:
CC BY-NC-SA 4.0
Installation, Use & Customization Guide
HOW TO!!!
Notes:
On a Snapmaker U1, if you use PETG like I did, then other than selecting the filaments/colors, this is ready to print!!!
1. Quick Start
If you're comfortable with basic fabrication and just want to install the adapter, this section is for you. More detailed explanations follow.
Print the vent adapter and backing plate.
Choose the location.
Top installation: place the adapter as far toward the front of the printer as practical.
Rear installation: place it as high as practical.
Check Bowden tubes, USB cables, clips, and all moving components before cutting.
Use the vent adapter to establish its position.
A dry-erase marker works well for temporary alignment marks.
Mark the screw centers with a fine-tip permanent marker.
Remove the adapter and use the backing plate to trace the rectangular airflow opening.
Drill the mounting holes through the PopCap only.
The screws should pass freely through the PopCap.
Do not drill through the printed backing plate.
Drill the four corners of the airflow opening.
Exact modeled corner diameter: 10 mm.
Common substitute: 3/8" (9.525 mm).
A conventional twist drill stepped gradually through several sizes is the recommended method for anyone unfamiliar with drilling polycarbonate.
Connect the four corner holes with straight cuts.
A Dremel/rotary tool works well.
The cut does not need to be cosmetically perfect; the flange hides it.
Remove burrs and test-fit everything.
Dry-assemble the adapter, PopCap and backing plate before applying adhesive.
Apply genuine 3M VHB between the OUTSIDE of the PopCap and the vent-adapter flange.
Use either one wide continuous piece/strip or two continuous narrow strips.
If the VHB covers the screw holes, make clearance holes through the tape before assembly.
Install the screws gradually and evenly.
Start all screws before tightening any of them fully.
The goal is an evenly clamped joint, not maximum possible screw torque.
Install the hose.
Push it over the outlet and retention lip.
Position the clamp behind the lip.
HVAC tape can be added if needed to seal corrugated hose.
Perform a final clearance check.
Verify that nothing can catch the backing plate or adapter.
Watch the first print and inspect the installation again after several hours of operation.
That's it.
If any particular step makes you think, “Wait, why are we doing it that way?”, the sections below explain it.
2. What You'll Need
Printed parts
Vent adapter/manifold
Internal backing plate, if using the mechanically clamped installation
Hardware
M4 thread-forming or wood-style screws
10 mm and 12 mm lengths are useful starting points, depending on your exact installation stack
Worm-drive or similar hose clamp sized for your duct
Sealing materials
Thin, genuine 3M VHB suitable for the materials and environment
Optional black HVAC tape for sealing corrugated ducting
Tools
Dry-erase marker
Fine or ultra-fine permanent marker
Drill
Sharp conventional twist-drill bits
Dremel or other rotary cutting tool
File or deburring tool
Eye protection
Optional push pin, awl or sharp drywall screw for making very light starting dimples
3. Installing the Adapter
3.1 A Note About the PopCap Material
The BIQU PopCap is made from polycarbonate (PC).
Polycarbonate is tough and considerably more impact-resistant than acrylic, but it can still be damaged by poor drilling or cutting technique. Excessive localized force or a grabbing cutter can create cracks radiating outward from a hole.
You don't need extraordinary plastic-working skills.
Just let the tools cut the material instead of forcing their way through it.
3.2 Remove the Panel Before Cutting
Remove the PopCap top or appropriate panel from the enclosure before doing the fabrication work.
Place it on a stable, protected work surface.
Before marking anything, inspect both sides and think about:
backing-plate clearance
screw locations
hose routing
Bowden tubes
USB cables
clips
printer movement
A few minutes spent looking now is considerably easier than moving a hole later.
3.3 Choosing the Location
The adapter can be mounted on the top or rear of the PopCap.
Top mounting with the backing plate
Position the adapter as far toward the front of the machine as the backing plate and surrounding geometry reasonably allow.
Orient the backing-plate bevel toward the rear.
Rear mounting
Position the adapter as high as practical.
Orient the backing-plate bevel downward.
The bevel is a secondary protection against moving tubing or clips catching the backing plate.
Ideally, nothing touches it.
If incidental contact does occur, however, the angled surface encourages the object to slide or deflect instead of hooking against a square edge.
Correct placement keeps things from touching.
The bevel makes an accidental touch less likely to become a catch.
Your printer gets the final vote. Check the actual movement and clearances on your machine.
3.4 Marking the Opening
Place the vent adapter in its intended final position.
A dry-erase marker is useful for temporary alignment marks around the outside of the flange.
Use the adapter's mounting holes to mark the screw centers with a fine permanent marker.
Then remove the adapter.
Place the backing plate in position and use its inner opening as the template for the airflow cutout.
Trace that opening with the permanent marker.
This is considerably easier than trying to trace the rectangular opening through the round outlet of the manifold.
Before cutting anything, put the adapter back in place one more time and verify that everything still agrees.
3.5 Drilling the Mounting Holes
Drill the small mounting holes while the PopCap panel is still intact and therefore at its stiffest.
Use a sharp drill bit slightly larger than the outside diameter of the screws so the screws pass freely through the PopCap.
The PopCap is not supposed to provide the screw threads.
The printed backing plate provides the engagement.
Support the panel, keep the drill reasonably perpendicular, use controlled pressure, and let the cutting edges do the work.
Do not drill through the backing plate.
Its printed holes are intentionally part of the fastening system.
3.6 Drilling the Four Corners
The modeled airflow opening uses a 5 mm corner radius, making a 10 mm drill bit the geometrically exact tool for creating each corner.
However, 10 mm bits aren't necessarily included in ordinary imperial drill sets.
A 3/8" twist drill is an excellent common substitute.
10 mm = exact modeled diameter
3/8" = 9.525 mm
Difference in radius = only about 0.24 mm
The 3/8" hole is therefore slightly conservative: it removes a tiny bit less material than the modeled opening.
Finding the center without measuring
There's an easy shop trick here.
Use the smooth end of the drill bit as a physical gauge against the printed backing plate's inside corner.
Nest the smooth cylindrical portion against the curve. Its circumference lets you visually locate the center of the corner without calculating offsets.
Mark that center.
The printed part itself has now transferred its geometry to your workpiece.
3.7 The Recommended Drilling Method
If you have not previously drilled polycarbonate, use a conventional sharp twist drill and work upward through several sizes.
For example:
small pilot → intermediate size → larger intermediate → 3/8" final
You don't need that exact sequence. The point is to avoid asking one large cutter to do everything at once.
Use light, controlled pressure.
As the drill approaches breakthrough, reduce the pressure further. You want the bit to finish cutting through the remaining polycarbonate, not push the remaining material out of its way.
Experienced alternative: spade bit
If you're already comfortable drilling polycarbonate, a properly controlled spade bit can make these holes very quickly.
It is not my recommended method for someone's first experience drilling PC.
Spade bits can grab, particularly around breakthrough, and an inexperienced operator can damage the panel or send a crack outward from the hole.
Both methods work.
One simply has a larger margin for error.
The PopCap is too expensive to make your first polycarbonate drilling experiment unnecessarily exciting.
3.8 Cutting the Straight Sections
Once the four corner holes exist, the difficult geometry is already established.
Use a Dremel or similar rotary tool to connect the tangent areas between the holes with straight cuts.
Work steadily.
If the polycarbonate begins melting rather than cutting cleanly, stop and allow things to cool.
That's simply the material politely telling you that you're putting heat into it faster than you're removing it.
If you're uncertain, stay slightly inside the marked line.
It's easy to remove another millimeter.
Adding one back is a considerably more advanced manufacturing process.
3.9 The Cut Doesn't Need to Be Beautiful
This is worth emphasizing.
The flange covers the cut edge.
The opening needs to:
provide an unobstructed airflow path
allow the adapter to sit flat
leave sufficient surrounding material for mounting and sealing
avoid interference with other components
It does not need to look like it came out of a CNC router.
Remove burrs, strings and raised material that interfere with fit.
Don't remove material merely because you can.
There is no prize for the largest possible hole.
4. Dry Fitting
Before applying VHB, assemble everything once without adhesive.
The stack is:
OUTSIDE
Vent adapter
↓
PopCap
↓
Backing plate
INSIDE
Start all screws before tightening them.
Check:
adapter position
screw alignment
backing-plate engagement
airflow opening
flat seating
internal clearance
external hose clearance
Then take it apart again for final sealing and assembly.
A dry fit costs a few minutes and catches problems while they're still easy to fix.
5. Sealing With 3M VHB
5.1 Where the VHB Goes
For the mechanically clamped installation, place the VHB between:
vent-adapter flange → VHB → OUTSIDE surface of PopCap
Do not place the primary seal between the PopCap and internal backing plate.
Is that critically important?
Probably not. Leakage would likely still be small.
But the assembly isn't installed yet, so there's no reason not to put the seal where it does the most good.
With the VHB outside, unwanted air encounters the seal at the first joint it could enter.
Putting the seal only beneath the backing plate would allow air to enter the exterior flange seam first, potentially travel along the cut edge or screw openings, and encounter the seal farther downstream.
That probably wouldn't be catastrophic.
It's simply an unnecessary leak path.
General principle
When practical, put the seal where unwanted air, water, dust or other material first enters the joint rather than farther downstream.
The two parts then have separate jobs:
Exterior VHB → sealing and compliant support
Backing plate → mechanical load distribution and screw engagement
5.2 Choosing VHB
There are many genuine 3M VHB products that are easy to find and appropriate for this type of project, particularly in gray and black.
You do not need to become an adhesive engineer.
Look for:
genuine 3M product identification
suitability for the bonded materials
appropriate environmental durability
reasonable tape thickness
Known 3M 4941-family starting points include:
4926 — approximately 0.4 mm
4936 / 4936F — approximately 0.6 mm
4941 / 4941F — approximately 1.1 mm
4956 / 4956F — approximately 1.6 mm
For this mechanically clamped installation, something around the thinner end of that range is attractive because we don't need an unnecessarily thick compliant layer.
White VHB is not inherently wrong. Genuine white 3M products exist.
The problem is simply that marketplace descriptions aren't specifications.
If you're buying an unfamiliar VHB product, verify the actual 3M product number rather than trusting a listing that merely says something like “white automotive VHB.”
5.3 One Wide Strip or Two Narrow Strips
Both approaches can work.
Wide VHB
A single piece approximately as wide as the flange mounting area gives excellent continuous support, adhesion and sealing.
If it covers the screw holes, make clearance holes through the VHB before installing the screws.
Don't simply drive the screws through the adhesive.
The VHB can grab the rotating screw, wind around the threads, bunch locally and create misleading turning resistance.
Ideally the screw should pass freely through:
adapter → VHB → PopCap
and then you should first feel meaningful thread engagement when it reaches the printed backing plate.
Two narrow strips
Another good arrangement is:
air opening → inner VHB strip → screw line → outer VHB strip → flange edge
This sandwiches the screw line between two compliant support/sealing ridges.
That's particularly useful if the available tape is somewhat thicker because it avoids having the flange pivot toward one isolated compliant ridge.
This isn't about needing twice as much adhesive strength.
It's about joint geometry.
6. Final Assembly
Once the surfaces are prepared and the VHB is installed, assemble the stack.
Start all screws first.
Then tighten them gradually and evenly, moving around the flange rather than fully tightening one screw at a time.
The goal is:
secure + flat + evenly clamped
—not maximum compression.
VHB needs good surface contact.
The backing plate needs secure engagement.
The screws need sufficient thread engagement.
Tighter isn't automatically better.
7. Adhesive-Only Top Installation
The backing plate is optional for a top-mounted installation if you prefer to bond the adapter directly to the outside of the PopCap using appropriate VHB.
This gives considerably more freedom in positioning because there is no internal backing plate that must clear the printer hardware.
In this configuration, however, the VHB is no longer merely acting as a seal and compliant interface.
It becomes the primary structural attachment.
Use plenty of available flange area and follow the adhesive manufacturer's recommendations for:
surface preparation
application temperature
application pressure
dwell time before loading
For long-term use around vibration and hose loads, I personally prefer the mechanically clamped sandwich.
That doesn't make adhesive-only mounting wrong.
It is simply another valid installation architecture with a different load path.
8. Connecting the Hose
Push the hose fully over the outlet.
The raised lip around the outlet is intentional.
Position the hose clamp behind the lip and tighten it sufficiently to retain the hose without unnecessarily crushing the printed outlet.
The components perform different jobs:
Printed collar → structural interface
HVAC tape → optional conformal air seal
Hose clamp → radial retention
Raised lip → additional axial pull-off resistance
Corrugated flexible hose doesn't always create a perfect air seal against a smooth cylindrical fitting.
If needed, wrap black HVAC tape around the connection before or around the clamped area to seal those irregularities.
9. Final Clearance and Inspection
Before printing, check everything again.
Pay particular attention to:
Bowden tubes
USB cables
clips
moving printer components
hose position
backing-plate clearance
Where practical, move the relevant printer components through their operating range and observe the clearances.
Watch the first print.
After several hours of operation—or after the first long print—inspect the installation again for:
loose fasteners
lifted VHB
hose movement
rubbing
unexpected contact
We're not expecting those things.
We're checking because looking costs almost nothing.
10. Printing and Appearance
The adapter was designed so the accent region can be printed in a contrasting color.
Use whatever color you want.
You can also assign the accent modifier the same color as the main body or remove the modifier entirely.
The horizontal color division was intentional.
Besides looking good, it minimizes unnecessary tool changes compared with many vertically divided multicolor designs and creates substantial interlocking area between the printed regions.
Sometimes the easiest thing to print also happens to look good.
We'll take the win.
11. Adding Your Own Logo
The publicly distributed version does not require my logo.
The logo visible in some project photographs is simply my customized version.
You can add your own logo using a slicer modifier.
Give the logo enough thickness to:
intersect the adapter body, and
extend slightly beyond the finished exterior surface.
Then slice the model and inspect the sliced preview, not merely the unsliced model view.
If part of the logo disappears:
move it slightly outward
slice again
inspect again
Repeat until the entire design appears correctly.
Then assign whatever filament/color you want.
The useful pattern is:
intersect body → protrude slightly → slice → inspect → adjust
That's a technique you can reuse on countless other printed objects.
12. Make It Yours
You are welcome to use this exactly as designed.
You are equally welcome to:
change the colors
remove the accent
add your own logo
modify the outlet
adapt it for another filtration system
change the mounting method
reuse the backing-plate concept
remix the geometry
take one useful idea and apply it to something completely unrelated
There isn't one sacred way to build this.
The files provide one working solution.
The documentation explains why I made the choices I made so you can decide whether those same choices make sense for you.
Knowing what I did lets you duplicate my installation.
Knowing why I did it lets you decide whether the same choice makes sense for yours.
If this is your first time cutting an enclosure, modifying a 3D print, using slicer modifiers, choosing an adhesive or thinking about load paths and seals, that's fine.
You don't need to know all of that before starting.
And you don't need to learn all of it just to install a vent.
Use the Quick Start if that's all you need.
Dig into the sections that interest you.
Ignore the ones that don't.
And if you learn something useful along the way, go use it on something else.




