Key switch for euro-profile cylinder (Schlüsselschalter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project is a functional key switch that requires only a few external components to work.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Key switch for euro-profile cylinder
The model is a realistic key switch that can switch in 2 directions. If only one direction is needed, the other direction can be blocked using the limiter component. Two small limit switches of type 10T85 are used as switching elements.
The key switch is completely tamper-proof against non-destructive external impacts thanks to the safety hook. Opening the key switch is only possible with the correct key. The switch is designed for a Euro profile cylinder with dimensions 30/10mm.
The cover of the key switch is available in many different variants with arrows pointing left, right, up, or down, and optionally with LED holes.
Components:
2x 🔩M5x16 (countersunk head)
1x 🔩M5x20 (hex screw)
4x 🔩2,5x20
1x M5 hex nut
2x limit switch (Type: 10T85)
1x euro-profile cylinder 30/10
(2x 5mm LEDs)
Prints:
1x housing
1x needed lid (11 different lids possible)
1x security hook
(1x limiter (when only 1 switch is needed))
Tools:
4mm drill
5mm drill
M5 thread cutter
8mm socket
deburring tool (makes life a lot easier)
screwdriver