RainDrop Planter – Planter with Top Sprinkler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RainDrop Planter is a functional planter featuring an adjustable overhead watering system
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🌧 RainDrop Planter – Planter with Top Sprinkler
RainDrop Planter is a functional planter featuring an adjustable overhead watering system, designed to create a gentle rain-like effect directly above the plant.
The sprinkler height can be adjusted, allowing the design to accommodate plants of different sizes. The locking mechanism keeps the upper arm securely fixed at the selected height.
The entire design was created with simple assembly, clean aesthetics, and convenient everyday use in mind.
✨ Key Features
🌿 Adjustable sprinkler height
💧 Overhead plant watering
🧲 Magnetic assembly system
🔩 Adjustable locking knob
🪴 Modular construction
🏠 Modern and minimalist design
🌱 Suitable for plants of different heights
🛠 Easy assembly using commonly available hardware
🧰 Required Hardware
For assembly, you will need:
🧲 8× magnets – 8 × 2 mm
🔩 1× M3 threaded insert
maximum length: 4 mm
outer diameter: 4.9 mm
🔧 1× M3 × 14 mm screw
⚙ 1× M3 nut
The M3 × 14 mm screw and M3 nut are used to assemble the adjustment knob.
🔧 Assembly
🧲 The magnets are best secured using cyanoacrylate glue (CA glue). Before permanently gluing them in place, make sure all magnets have the correct polarity.
The vertical support rod should also be glued into the base using cyanoacrylate glue to ensure a rigid and stable connection.
Next, install the M3 threaded insert into the designated hole.
The adjustment knob should be assembled using:
1× M3 × 14 mm screw
1× M3 nut
Once assembled, the sprinkler height can be freely adjusted and locked in the desired position.
📌 Tips
🧲 Always check the polarity of the magnets before gluing them in place.
🧪 Cyanoacrylate glue (CA glue) is recommended for both the magnets and the support rod-to-base connection.
🔩 The M3 threaded insert should not be longer than 4 mm.
📏 The recommended maximum outer diameter of the insert is 4.9 mm.
🌿 The sprinkler height can be adjusted to suit the specific plant.
For the best visual result, I recommend using the Monotonic pattern for the final top surface layer, while the inner top surface should use Archimedean Chords.
These settings are already included in the provided 3MF file using modifiers, so no manual adjustment is required.
📦 Additional Hardware
The following parts need to be prepared separately:
8× 8 × 2 mm magnets, 1× M3 threaded insert, 1× M3 × 14 mm screw, and 1× M3 nut.
🌿 Please note: this is more of a decorative planter than a tool for starting your own indoor plantation. 😄
🔧 Future Update
In my free time, I’ll try to redesign the project to eliminate the need for the threaded insert, screw, and nut, making the assembly even simpler and requiring fewer additional parts.