Magnet Fit Gauge – 6/8/10 mm Magnet Hole Tolerance Tester
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple 3D printable gauge for testing Ø6, Ø8 and Ø10 mm magnet holes with +0.0 to +0.4 mm clearance. Find the perfect
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 96
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Find the perfect hole size for your magnets before designing or printing your final part.
The Magnet Fit Gauge is a simple calibration tool designed to help you determine the ideal hole diameter for commonly used round magnets.
It includes three common magnet diameters:
Ø6 mm
Ø8 mm
Ø10 mm
For each size, five different clearances can be tested:
+0.0 / +0.1 / +0.2 / +0.3 / +0.4 mm
For example, the Ø8 mm row provides holes from Ø8.0 to Ø8.4 mm.
This allows you to quickly find the right fit for your printer, filament and application — from a tight press fit to a looser fit suitable for glue.
Why use a Magnet Fit Gauge?
Hole dimensions can vary depending on your printer calibration, filament, slicer settings and print orientation. Magnets themselves may also have small dimensional variations.
Instead of printing several prototypes, simply print this gauge using the same printer, filament and settings as your final part.
Test your magnet, find the clearance that works best, and use that diameter in your CAD model.
Easy magnet removal
Each magnet recess is 3 mm deep and includes a Ø3 mm through-hole.
If a magnet becomes stuck during testing, simply push it out from the back using a piece of 1.75 mm filament, a small rod or a similar tool.
Features
Ø6, Ø8 and Ø10 mm magnet sizes
5 clearance levels for each diameter
+0.0 to +0.4 mm clearance
0.1 mm increments
15 different test holes
3 mm deep magnet recesses
Ø3 mm magnet removal holes
Compact 100 × 65 mm format
No supports required
Quick and easy print
Hanging hole for workshop storage
Recommended use
For the most accurate results, print the gauge using the same printer, filament, nozzle and slicer settings that you intend to use for your final model.
The result is specific to your printing setup, which is exactly the purpose of the gauge.
Design → Print → Test → Perfect fit!