1 / 1
Organizer Bins / 28 Sizes / Low-Filament + Fast Printing / Drawer Storage Boxes — zdjęcie 1

Organizer Bins / 28 Sizes / Low-Filament + Fast Printing / Drawer Storage Boxes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ultra-fast-printing + low-filament bins with 1mm walls and bottom - 28 sizes (from small 45 mm, up to large 315 mm bins)

Ocena
0 / 5
Polubienia
11
Pobrania
77
Wydruki
1
Wyświetlenia
175
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

An ultra-lightweight, material-efficient and fast printing organizing system for drawers, cabinets, shelves or desks.

(😉 The smaller bins are also perfect for using up those annoying leftover rolls of filament which have been lying around for ages.)

🟪 Material-Efficient & Fast Print Times:
Optimized 1 mm wall thickness delivers nearly the structural strength of 3 walls while printing only 2 wall loops, saving print time and material. 
(Use the ARACHNE wall generator, so that your slicer generates the 1 mm walls as just 2 wall loops)
The bottom thickness is 1 mm too.

For example:
🔸 45 x 45 mm = 10 g
🔸45 x 90 mm  = 17 g
🔸45 x 180 mm  = 30 g
🔸90 x 90 mm  = 26 g
🔸90 x 180 mm  = 44 g

🟪 Stability:
All inner and outer edges are rounded for a sleek look. It also reinforce stress points and prevent corner cracking.

🟪 28 Sizes Included:
Full set ranging from small 45 x 45mm bins up to large 315 x 315mm bins.

🟪 Clean File Naming:
Uniformly named by footprint dimensions (45_x_45_mm_Bin, 45_x_90_mm_Bin, etc.) for quick and easy navigation (hopefully^^).

🟪 Custom Height Tip:
Models come at a standard height of 45mm.
If you need a shallower bin, simply load the file into your slicer and use the cut tool to trim it to your desired height.


-------------------------------------------------------------------------------------------------------------------------------

The files are already pre-oriented.

My print settings for PLA:

wall generator: ARACHNE !
0.2 mm layer height
4 walls
5 top and bottom shell layers
NO supports needed

👉 Discover more practical tools in my Everyday Solutions Collection

Tagi