1 / 7
DeskWiG ESP32-S3 Desk Widget Enclosure - 1.9" ST7789 Display Case with Rotary Encoder — zdjęcie 1
1 / 7

DeskWiG ESP32-S3 Desk Widget Enclosure - 1.9" ST7789 Display Case with Rotary Encoder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ESP32-S3 desk display enclosure: 1.9" IPS screen, optional knob. Shows pings, clock, weather, any API. Open firmware.

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
89
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

DeskWiG (Desk Widget) is a 3D printed enclosure for a small ESP32-S3 desk display with a 1.9" IPS screen and an optional rotary encoder knob. It shows server pings, a clock, weather, stock prices, Home Assistant sensors, or anything with a web API, and you design your own screens in a browser editor. No coding needed.

Firmware, wiring and full setup guide: github.com/BeekrBonkr/DeskWiG

Want to remix it? The full CAD is on Onshape. Open it, make a copy, and change whatever you want: DeskWiG on Onshape

The enclosure

One solid print, no moving parts and no supports needed for the enclosure body. The base holds the ESP32-S3-DevKitC-1, the display sits in an angled panel and is secured with two M2x6 screws, and a second angled mount takes the optional rotary encoder. The encoder is held in with an M7 nut, which you can print or buy.

Files included

  • Chassis.stl - the enclosure

  • Chassis.3mf - the same part as a 3MF project

What you need

  • ESP32-S3-DevKitC-1 (N16R8: 16 MB flash, 8 MB PSRAM): Amazon

  • 1.9" 170x320 IPS LCD, ST7789V2, SPI: Amazon

  • 2x M2x6 screws to secure the display

  • KY-040 rotary encoder with push button (optional) + M7 nut

  • Dupont jumper wires

Wiring

Display: SCLK 12, MOSI 11, CS 10, DC 9, RST 8, VCC 3V3, GND GND, BL 3V3

Encoder (optional): CLK 5, DT 6, SW 7, + 3V3, GND GND

All pins are defined in src/app/Board.h if you want to change them.

Features

  • Ping / server status widget with latency, up/down history and trend arrows

  • NTP clock with automatic daylight saving

  • Build your own screens in a browser editor with a live preview, then save them to the device

  • Pull live data from any JSON API: weather, stocks, Home Assistant, OctoPrint, Pi-hole and more

  • 52 example layouts included

  • Turn the knob to switch widgets, click to show the device address

  • Status LED that can react to your data

  • Wireless firmware updates once it's on your network

Getting it running

  1. Print the enclosure and drop the DevKitC into the base. Mount the display in the angled panel with the two M2x6 screws, and put the encoder into its mount.

  2. Wire it up using the pins above.

  3. Flash the firmware with PlatformIO (pio run -t upload).

  4. On first boot it starts a hotspot called DeskWiG-Setup (password configureme). Join it, pick your WiFi, and you're set.

  5. Open http://deskwig.local to switch widgets, edit layouts, and add data sources.

Full details are in the GitHub README. If you build one, post a make, I'd love to see what screens people come up with.

Also available on

  • Printables

  • Thangs

  • MakerWorldDeskWiG (Desk Widget) is a small desk display built around an ESP32-S3 and a 1.9" IPS screen. It started as a Christmas gift for my dad and turned into a full project. It can show server pings, a clock, weather, stock prices, Home Assistant sensors, or pretty much anything with a web API, and you can design your own screens right in the browser. No coding needed.

Firmware, wiring and full setup guide: github.com/BeekrBonkr/DeskWiG

Want to remix it? The full CAD is on Onshape. Open it, make a copy, and change whatever you want: DeskWiG on Onshape

The enclosure

One solid print, no moving parts. The base holds the DevKitC, the display sits in an angled panel and is secured with two M2x6 screws, and a second angled mount takes the optional rotary encoder. The encoder is held in with an M7 nut, which you can print or buy.

What you need

  • ESP32-S3-DevKitC-1 (N16R8: 16 MB flash, 8 MB PSRAM): Amazon

  • 1.9" 170x320 IPS LCD, ST7789V2, SPI: Amazon

  • 2x M2x6 screws to secure the display

  • KY-040 rotary encoder with push button (optional) + M7 nut

  • Dupont jumper wires

Wiring

Display: SCLK 12, MOSI 11, CS 10, DC 9, RST 8, VCC 3V3, GND GND, BL 3V3

Encoder (optional): CLK 5, DT 6, SW 7, + 3V3, GND GND

All pins are defined in src/app/Board.h if you want to change them.

Features

  • Ping / server status widget with latency, up/down history and trend arrows

  • NTP clock with automatic daylight saving

  • Build your own screens in a browser editor with a live preview, then save them to the device

  • Pull live data from any JSON API: weather, stocks, Home Assistant, OctoPrint, Pi-hole and more

  • 52 example layouts included

  • Turn the knob to switch widgets, click to show the device address

  • Status LED that can react to your data

  • Wireless firmware updates once it's on your network

Getting it running

  1. Print the enclosure and drop the DevKitC into the base. Mount the display in the angled panel with the two M2x6 screws, and put the encoder into its mount.

  2. Wire it up using the pins above.

  3. Flash the firmware with PlatformIO (pio run -t upload).

  4. On first boot it starts a hotspot called DeskWiG-Setup (password configureme). Join it, pick your WiFi, and you're set.

  5. Open http://deskwig.local to switch widgets, edit layouts, and add data sources.

Full details are in the GitHub README. If you build one, post a make, I'd love to see what screens people come up with.

Tagi