DeskWiG ESP32-S3 Desk Widget Enclosure - 1.9" ST7789 Display Case with Rotary Encoder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ESP32-S3 desk display enclosure: 1.9" IPS screen, optional knob. Shows pings, clock, weather, any API. Open firmware.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
DeskWiG (Desk Widget) is a 3D printed enclosure for a small ESP32-S3 desk display with a 1.9" IPS screen and an optional rotary encoder knob. It shows server pings, a clock, weather, stock prices, Home Assistant sensors, or anything with a web API, and you design your own screens in a browser editor. No coding needed.
Firmware, wiring and full setup guide: github.com/BeekrBonkr/DeskWiG
Want to remix it? The full CAD is on Onshape. Open it, make a copy, and change whatever you want: DeskWiG on Onshape
The enclosure
One solid print, no moving parts and no supports needed for the enclosure body. The base holds the ESP32-S3-DevKitC-1, the display sits in an angled panel and is secured with two M2x6 screws, and a second angled mount takes the optional rotary encoder. The encoder is held in with an M7 nut, which you can print or buy.
Files included
Chassis.stl - the enclosure
Chassis.3mf - the same part as a 3MF project
What you need
ESP32-S3-DevKitC-1 (N16R8: 16 MB flash, 8 MB PSRAM): Amazon
1.9" 170x320 IPS LCD, ST7789V2, SPI: Amazon
2x M2x6 screws to secure the display
KY-040 rotary encoder with push button (optional) + M7 nut
Dupont jumper wires
Wiring
Display: SCLK 12, MOSI 11, CS 10, DC 9, RST 8, VCC 3V3, GND GND, BL 3V3
Encoder (optional): CLK 5, DT 6, SW 7, + 3V3, GND GND
All pins are defined in src/app/Board.h if you want to change them.
Features
Ping / server status widget with latency, up/down history and trend arrows
NTP clock with automatic daylight saving
Build your own screens in a browser editor with a live preview, then save them to the device
Pull live data from any JSON API: weather, stocks, Home Assistant, OctoPrint, Pi-hole and more
52 example layouts included
Turn the knob to switch widgets, click to show the device address
Status LED that can react to your data
Wireless firmware updates once it's on your network
Getting it running
Print the enclosure and drop the DevKitC into the base. Mount the display in the angled panel with the two M2x6 screws, and put the encoder into its mount.
Wire it up using the pins above.
Flash the firmware with PlatformIO (
pio run -t upload).On first boot it starts a hotspot called DeskWiG-Setup (password configureme). Join it, pick your WiFi, and you're set.
Open http://deskwig.local to switch widgets, edit layouts, and add data sources.
Full details are in the GitHub README. If you build one, post a make, I'd love to see what screens people come up with.
Also available on
MakerWorldDeskWiG (Desk Widget) is a small desk display built around an ESP32-S3 and a 1.9" IPS screen. It started as a Christmas gift for my dad and turned into a full project. It can show server pings, a clock, weather, stock prices, Home Assistant sensors, or pretty much anything with a web API, and you can design your own screens right in the browser. No coding needed.
Firmware, wiring and full setup guide: github.com/BeekrBonkr/DeskWiG
Want to remix it? The full CAD is on Onshape. Open it, make a copy, and change whatever you want: DeskWiG on Onshape
The enclosure
One solid print, no moving parts. The base holds the DevKitC, the display sits in an angled panel and is secured with two M2x6 screws, and a second angled mount takes the optional rotary encoder. The encoder is held in with an M7 nut, which you can print or buy.
What you need
ESP32-S3-DevKitC-1 (N16R8: 16 MB flash, 8 MB PSRAM): Amazon
1.9" 170x320 IPS LCD, ST7789V2, SPI: Amazon
2x M2x6 screws to secure the display
KY-040 rotary encoder with push button (optional) + M7 nut
Dupont jumper wires
Wiring
Display: SCLK 12, MOSI 11, CS 10, DC 9, RST 8, VCC 3V3, GND GND, BL 3V3
Encoder (optional): CLK 5, DT 6, SW 7, + 3V3, GND GND
All pins are defined in src/app/Board.h if you want to change them.
Features
Ping / server status widget with latency, up/down history and trend arrows
NTP clock with automatic daylight saving
Build your own screens in a browser editor with a live preview, then save them to the device
Pull live data from any JSON API: weather, stocks, Home Assistant, OctoPrint, Pi-hole and more
52 example layouts included
Turn the knob to switch widgets, click to show the device address
Status LED that can react to your data
Wireless firmware updates once it's on your network
Getting it running
Print the enclosure and drop the DevKitC into the base. Mount the display in the angled panel with the two M2x6 screws, and put the encoder into its mount.
Wire it up using the pins above.
Flash the firmware with PlatformIO (
pio run -t upload).On first boot it starts a hotspot called DeskWiG-Setup (password configureme). Join it, pick your WiFi, and you're set.
Open http://deskwig.local to switch widgets, edit layouts, and add data sources.
Full details are in the GitHub README. If you build one, post a make, I'd love to see what screens people come up with.