LayersFactory
Zgłoś model
1 / 14
Working minecraft TNT — zdjęcie 1
1 / 14

Working minecraft TNT

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tyqloo

Tyqloo

@Tyqloo

Working Minecraft TNT using esp32 and servo to make fake explosion. It is not real explosive.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
49
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial
SzczegółyPliki (20)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (3)Powiązane

I'm a Minecraft fan, and I wanted something cool for my desk that would actually work. So I built a working Minecraft TNT. It's 10x10x10 cm, just like my working jukebox, but to me, this TNT is way cooler.

Parts (links):

Screw and inserts:

  • 4x M2.5x8mm screw

  • 6x M2.5x4mm screw

  • 2x M2.5x14mm screw

  • 4x M2.5x4mm Heat insert

Springs:

  • 1x 50x13mm normal spring

  • 4x torsion spring 15x30mm

A very detailed guide, including the electronic schematic, is available here

How to Reset TNT:

  1. Reset the side panels:

    Loosen the two screws holding the servo plate, re-hook the 4 arms into position, and tighten the screws back down.

  2. Lock the top lid:

    • Manually push the top servo latch back towards the battery holder. it needs to touch it.

    • Power cycle the TNT (turn it off and back on).

    • You now have a 15-second window: place the top lid on and hold it down gently until the servo automatically moves and locks it into place.

I did everything myself from the ground up so I would really appreciate it if you could rate this model. If you have any questions about the code or wiring, just ask me in the comments or send me DM!

Tagi

toydeskgametntworkingelectronicsservofakesg90mg90sexplosionminecarft