PI NAS – Raspberry Pi NAS Case with Touchscreen & 3 Drive Bays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rounded NAS case for three rubber-mounted 2.5-inch drives, a Raspberry Pi and an ESP touchscreen. Design your own inne
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
PI NAS is a rounded enclosure for DIY electronics projects. Originally built as a home NAS and music server, it can also house other projects: keep the outer shell and design your own inner frame to suit your hardware, adapting the panel openings where needed.
My build fits three 2.5-inch drives with rubber dampers, a Raspberry Pi 3 Model B, a cooling fan, a 2.8-inch ESP32-S3 touchscreen and a buck converter, with a powered USB hub and USB-to-SATA adapters connecting the drives. The screen uses custom firmware for NAS status and music information.
The enclosure consists of an outer shell, front and rear panels, and an inner frame. Check component clearances, mounting points and ventilation when adapting it to your own project.