Simple Robust AirTag Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple, robust AirTag holder that bolts together with four M3 screws. No supports, no glue, easy battery swaps.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
This simple, robust AirTag holder keeps your tracker locked between two solid printed plates. Four M3 screws clamp everything together, so your AirTag stays put. The large loop at the top makes it easy to attach to bags, luggage, keys or kit. It's a great pick for anyone who wants a tougher, no-fuss alternative to a thin clip-on case.
Assembly is straightforward. Insert your AirTag, align the front and back plates, and secure with four M3 x 8mm screws and four M3 nuts. No glue is required, so battery swaps are easy. There are two print profiles available, one for PLA and one for PETG, so just pick the one that matches your filament. Customise the colour to match your gear for a subtle look, or make it stand out with a bright hue.
Filament Colour & Material
Print profiles are included for both PLA and PETG. PLA works well for everyday use, and PETG is the better choice if it will live outdoors or want it more robust. Bright red (as pictured) is easy to spot, while black or grey blends in with most gear.
Print Settings
Profiles: PLA and PETG, both ready to print
Layer height: 0.16mm
Wall line count: 4
Infill: 25%, gyroid
Supports: No
Orientation: Both plates flat on the bed
Hardware: 4 x M3 x 8mm screws, 4 x M3 nuts
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: